Collection: ECU Chip Tuning

Original Alientech KESS V3 KESS3 Master Version ECU and TCU Programming Tool with Car OBD-Bench-Boot LCV Protocol AuthorizationThe KESS3 is the latest ECU tuning tool from Alientech that replaces both the KESSv2 and K-TAG. KESS3 gives you more control than its predecessors, KESSv2 and K-TAG, and can be upgraded without the need to spend money...

Original Alientech KESS V3 KESS3 Slave Version ECU and TCU Programming Tool with Car OBD-Bench-Boot LCV ProtocolsThe KESS3 is the latest ECU tuning tool from Alientech that replaces both the KESSv2 and K-TAG. KESS3 gives you more control than its predecessors, KESSv2 and K-TAG, and can be upgraded without the need to spend money on...

Original Alientech KESS V3 KESS3 Master Version ECU and TCU Programming Tool with Car Bench-Boot LCV ProtocolPackage includes: Original Alientech KESS V3 KESS3 and Master Version Car Bench-Boot LCV Protocol AuthorizationNewly Add CONTINENTAL SID212Notice: 1. Once sold, no refund or return service is allowed for the kess3 device and authorization.2. The package contains the master version of Car Bench-Boot LCV Protocol...

Product Introduction:   GODIAG GT107+ DSG plus gearbox data adapter is a DSG gearbox connection adapter. DSG gearbox maintenance engineers can clone, diagnose and repair DSG gearbox ECU and can also read, write and adjust data for DSG gearbox ECU via PCMFlash, PCMTuner, and Kessv2, etc.   This adapter has automatic and manual selection for...

Check KESS3 Vehicle List KESS3 provides users with a quick and simple interface to any engine control unit and automatic gearbox on the market. Product Highlights: 1. All in One-OBD, Bench and Boot Mode. KESS3 combines 3 operating modes in one tool. OBD, Bench and Boot Mode. Configure it according to your needs and your work....

FC200-MPC5XX-P02-M230102 Adapter for BOSCH MPC5xx Read/Write Data on BenchDescription:CG FC200-MPC5XX-P02-M230102 adapter can be used for MPC5X series clone without opening cover.Please refer to our official blog How to Use FC200 with MPC5xx Adapter on BMW EDC16CP35Product Functions:Supported ECU Models: ME9.0, MED9.1, MED9.5.10, EDC16C2, EDC16CB, EDC16CP31, EDC16CP35. More models are being upgraded.Product Features: Adaptation without disassemblyStable and safeFunction...

The OBDSTAR DC706 is an ECU programming tool designed for vehicle engine control modules (ECM), transmission control modules (TCM), and body/other system ECUs. It reads ECU information, reads/writes EEPROM, D‑Flash, P‑Flash, and MAP data, resets ECUs to virgin state, calibrates mileage, reads immobilizer PIN codes, performs ECU recovery, and more – all via OBD or...

The OBDSTAR DC706 ECU tool is designed for flashing vehicle Engine Control Modules (ECM), Transmission Control Modules (TCM), and body/other system ECUs. It can read ECU information, read/write EEPROM, D‑Flash, P‑Flash, and MAP data, reset ECUs to virgin state, calibrate mileage, read immobilizer PIN codes, perform ECU recovery, and more—all via OBD or bench connection,...

FC200 User Manual FC200 Model Compatibility List .xls Free Update Online for 1 year, subscription is $300/ year Product Introduction:  FC200 ECU programmer is designed for ECU/EGS clone, and it supports 4200 kinds of ECUS/EGS, 3 types of operation modes, involving 80% of the models on the market. FC200 unit has data loss prevention, automatic...

FC200 User Manual. Supported Models List FC200 Support Checksum List CGDI FC200 ECU List Product Introduction: The FC 200 ECU Programmer is designed for ECU and EGS cloning, supporting over 4,200 types of ECUs and EGS units across three operation modes, covering approximately 80% of the vehicle models on the market. The FC 200 features...

OBDSTAR DC706 Full Version ECU TCU BCM Cloning Tool + P003+ Adapter Supports Checksum Correction OBDSTAR DC706 ECU tool is designed for vehicle ECM, TCM and body/other system for ECU flasher. It can read ECU info, R/W Eeprom/Dflash/Pflash/MAP, reset ECU(Virgin), calibrate mileage, read IMMO pincode, ECU recovery... It's all by OBD or bench mode and makes...

Module Functions:   1. Support MB DSM (FBS4) virgin and data transfer with part numbers A0002703252/A0002703352/A0002703452. 2. Support MB DSM222 (FBS4) virgin and data transfer with part numbers A0002704252/A0002704452/A0002704652.   ACDP Configuration List (Module 42 MB DSM (FBS4) virgin / data transfer)  Item NO. Adapters/Parts Pictures Quantity Adapters/Parts Functions 1 MB-DMS interface board    1PC Applicable...