OBD Cable and Connector

Product Description 1、GODIAG GT110 FOR VW Skoda Seat CAN-Bus UDS 4th Generation IMMO System Test Platform Cable with POGO PIN to Read & Write POGO PIN Data 2、GODIAG GT111 FOR VW Skoda Seat CAN-Bus 3rd & 3.5th Generation Dashboard IMMO Key Matching Test Platform Cable with POGO PIN to Read & Write Data 3、GODIAG GT112...

Product Introduction: GODIAG Gearbox ISM Cable for Mercedes Benz 5-in-1 set is compatible with all devices capable of reading and writing data from Mercedes-Benz transmission modules, such as pcmflash, foxflash, dfbfoxflash, FGTagFlash, and XHORSE Multi-Prog. It can perform data reading and writing, ECU cloning, and other operations with these devices. It also supports all devices...

GODIAG For BMW BDC3/BCP Programming Test Platform Manual 1. The GODIAG BMW BDC3 / BCP Programming Test Platform is designed for: Professional BMW exclusive repair technicians and luxury car electronics workshops Auto locksmiths focusing on BMW smart key adding, all-keys-lost matching and BDC immobilizer repair ECU/BDC module offline bench programming & coding specialists Instrument cluster...

Exclusive release of TOYOTA 30PIN connector (no need to pierce the harness), supports 4A and 8A-BA types. 30pin cable direct read of the Smart ECU bypassing the pin emulating the key from dump and letting you add your Smart.  Support Functions ID4A proximity key programming (all keys lost, no need pincode) ID8A-BA proximity key programming (all keys...

Note: This product can be used with Xhorse Key Tool Plus (SK305) to diagnose Volkswagen transmission modules. Product Functions: 1. Supports connections to the AUTEL G-BOX, XHORSE MULTI-PROG, and all other OBD2-connectable devices, including the OBD2 BENCH PCMflash FC200, KESSV2, for diagnostics, data read/write, and cloning.2. Supports V-A-G Gearbox V30/DQ200/DL501/VL300/VL381/DQ500/DQ250/DQ380/DQ381/DQ400E/DL382 for direct connection to the...

1. The FCA 12+8 Universal SGW Bypass Adapter is Designed for: Professional auto repair technicians specializing in Stellantis/FCA group vehicle maintenance Auto locksmiths performing FCA all-keys-lost matching, IMMO programming and mileage calibration ECU repair specialists conducting FCA module coding, flash programming and active component tests Independent garages without official FCA dealer diagnostic equipment Mobile roadside...

Compatible with Lonsdor K518, Autel,OBDSTAR and Xhorse devices.With this cable, there is no need to break or hook up the wires and no risk of damaging the communication cables. Compatible vehicles:Nissan Rogue T33 2021-Nissan Pathfinder 2021-Nissan Sylphy B18 2021-Nissan Ariya 2022-Nissan New Sylphy B18 2021-Nissan New X-trail T33 2021-Mitsubishi Outlander 2021-and other models.  The Nissan...

Product Introduction:   Full protocol OBD2 jumper is used to connect ECU for ECU programming via OBD2 way such as MPPS, FGTECH, KESSV2, BYSHUT, DISPROG, etc. Product Functions:   1. Supports DC power supply  2. Support safety protection banana head super programming dedicated connection port power supply.  3. Independent GND4, GND5 [meet the needs of...

SK420-Godiag CAS1 CAS2 SER BMW Mech-Key Test Platform EN-V1.1  1. The GODIAG BMW CAS1/CAS2 Mech‑Key Test Platform is Designed for: Professional auto‑locksmiths specializing in BMW CAS1 / CAS2 mechanical key programming and all‑keys‑lost jobs Automotive ECU / IMMO repair technicians for bench testing of disassembled CAS anti‑theft modules Independent repair workshops performing BMW key addition,...

1. The GODIAG GT107+ is designed for: Professional transmission repair shops specializing in DSG/TCU clone, data refresh and gearbox overhaul Car tuning technicians using PCMFlash, PCMTuner, KESS V2 for transmission calibration programming Auto electronic repairers handling second-hand gearbox computer matching and virginization Technicians frequently working on VAG, Mercedes, BMW, Renault, Honda transmission ECUs Bench repair...

godiag gpt boot obd2 pinout user's manual 1. The GODIAG ECU GPT Boot AD Programming Adapter is designed for: Professional auto ECU repair shops doing engine computer clone, data refresh and virginization Car tuning technicians relying on PCMFlash software for ECU calibration programming Auto electronic repairers and locksmiths handling second-hand ECU matching Technicians equipped with...

MQB models may range from superminis to large family cars, replacing the current generations of models. The MQB architecture replaces the PQ25, PQ35 and PQ46 platforms. Our product is a connecting cable designed for the MQB IMMO system, enabling engineers to conveniently perform off-vehicle operations such as IMMO programming, matching, and diagnostics on the MQB...

Godiag OBD2-DB25 cable works together with Colorful Jumper Cable DB25. It is a dedicated connection line for single ECU module or multiple ECU modules, can work together with the professional diagnostic / programming device to perform ECU diagnosis, ECU programming, power adjustment and ECU module maintenance etc.  The clear defined logos are convenient for customers to...

GODIAG For BMW BDC2/BCP Programming Test Platform Manual 1. The GODIAG BDC2 Test Platform is designed for: Professional auto locksmiths specializing in BMW G-series BDC2 all-key-lost & key addition Auto electronic repair shops doing offline BDC2 data recovery and module replacement Technicians who disassemble vehicle BDC/FEM modules for remote bench repair Repairers equipped with Autel...

Development Background:For vehicles before 2017, key matching requires soldering wires to read and write to the KVM RFA module. For vehicles after 2017, key matching requires replacing the KVM RFA module's MCU. Careless operation during these two steps can easily cause the module to lose communication, so a communication test of the KVM RFA module...

1. The GODIAG GT105 II is designed for: Professional auto locksmiths handling all-keys-lost matching for VAG, Ford, Toyota, Porsche, Mitsubishi vehicles ECU tuning & repair technicians performing bench/OBD ECU read, write and clone with MPPS, KESSV2, FGTECH etc. General repair shops needing stable uninterrupted power supply during vehicle battery replacement Field mobile technicians without fixed...

GODIAG Test Platform Cables GT112 K-Line with GT111 CAN-Bus and GT110 CAN-Bus UDS With Pogo Pin For VAG 2nd/3rd/3.5th/4th Generation Dashboard IMMO This cable set includes three cables: SF395+SF396+SF397GODIAG Bundle Package:GODIAG GT112 K-Line for VW Skoda Seat 2nd & 3rd generation dashboard IMMO key matching test platform cable performs offline key and IMMO instrument synchronization test,...

GT110 English Manual Pogo Pin Connection Diagram 1. The GODIAG GT110 is Designed for: Professional auto locksmiths performing VAG 4th‑generation UDS dashboard IMMO offline key‑matching and all‑keys‑lost jobs Instrument cluster repair technicians for bench read‑write, mileage correction and IMMO data recovery on VAG UDS dashboards Automotive electronic repair shops for offline bench diagnosis of disassembled...

Product Features: ECU Read/Write Wiring Harness(ECM-003) Supports 2021-and-later LOCKED models Supports for BMW B48/B57/B58ECU Data Read/Write & ISN Reading BOSCH MD1CPO32 TC299TP BOSCH MG1CS024 TC298TP BOSCH MG1CS201 TC298TP   Supported Tools: KeyMaster G3, DC706,  ECU MASTER configurations with APackage includes: 1pc x OBDSTAR for BMW B48/B57/B58 ECU Read/Write Wiring Harness(ECM-003)

Product Features: Bypass vehicle active alarm during AKL smart key programming No annoying alarm noise, more stable & efficient Wide coverage for Ford & Lincoln models from 2015+ Ideal tool for all locksmiths working on Ford & Lincoln carsSupported Models:  For Ford:  Taurus 2016- Escort 2018- Explorer 2016- Mondeo 2016- Focus 2018- F-150 Raptor 2018-2019...

Mercedes Locks Platform Test Line for  W204   W212   W221  W164  W166  Scope of application:The EIS ELV maintenanceKey programmerDetection keyPackage including:1pc x  Mercedes locks OBD test line 

Xhorse VVDI XDKP91GL 40-Pin Gateway Cable for Nissan Mitsubishi Compatible with VVDI Key Tool Plus and Key Tool Max Pro. Functions: Applicable to Nissan Sylphy and Sentra B18 models from 2021.08 to the latest versionsSupports add key with PIN code bypassSupports all keys lost with PIN code bypass (with J3 and J3 connectors) Compatible Models:...

This set can be used to read/write, clone, diagnose VW Audi V30, DQ200, DQ250, DQ500, VL300, VL381, DL510 gearbox TCUs without soldering.It is compatible with multiple devices, PCM-flash, kess, Autel, VVDI, Launch X431, openport etc. Package list:1pc x Godiag GT107+ ECU Prog AD1pc x DB9 DSG Gearbox Universal Conversion Jumper1pc x Power Cord with Battery...

1. The GODIAG GT106 PLUS is designed for: Professional heavy-duty truck repair technicians, commercial vehicle service workshops Mechanics using 12V passenger car Bluetooth diagnostic tools (Launch, ThinkCar series) for 24V truck diagnosis Auto parts inspectors testing automotive relays and fuel injectors offline Mobile roadside repair specialists handling light trucks, pickups and diesel commercial vehicles Automotive...