super deal

On activation of this SW package for FLEX (FLK02), the user may work on all supported protocols for ECUs and any other modules in motorcycles.Thanks to the state-of-the-art FLEX HW, programming in OBD and Bench mode guarantees reading and writing of the contents of the control units with no need to open them.This software package...

Complete Bench/Boot MEDC17 software package for programming BOSCH MEDC17 ECUs directly from the engine control unit connector.SOFTWARE FLEX INFINEON TC17XX  Bench/Boot – SLAVEWith the Bench/Boot MEDC17 Software package, you can now program a great deal of BOSCH MEDC17 controllers directly from the ECU connector without opening the unit. You will never damage a BOSCH MEDC17...

Complete Bench - Boot MEDC17 software package for programming BOSCH MEDC17 ECUs directly from the engine control unit connector.SOFTWARE FLEX INFINEON Bench/Boot TC17XX – MASTERWith the Bench / Boot MEDC17 Software package, you can now program a great deal of BOSCH MEDC17 controllers directly from the ECU connector without opening the unit. You will never...

This software package includes protocols for work in JTAG AUD on engine control units that mount NEC76F00xx microprocessors. This family of microprocessors can be found in Toyota Denso 275xxx or 175xxx engine control units. This SW package makes it possible to communicate with the supported units through the JTAG port so in this case, it...

This FLEX SW package allows work in Bootloader / Bench mode on control units that mount ST10F2xx microprocessors. This family of microprocessors is generally supported by Marelli in older generation models, such as IAW, and is often equipped with an internal Flash.

The FLS0.3S software package allows the SLAVE user to work on BDM and Bench protocols. This programming mode is used for communication with ECUs that mount the Motorola MPC5xx family of microprocessors. This type of microprocessor can generally be found on older generation vehicles fitted with EDC16 or MED9 ECUs. MAGICMOTORSPORT recommends that this SW...

LAUNCH X431 EV Diagnostic Upgrade Kit + Activation Card Compatible with X431 PAD V & PAD VII, PRO3 V+ 5.0 \ PRO3(PRO3S+ V5.0)\PRO3 ACE\ PRO3 APEXAfter the App is upgraded to the latest version, LAUNCH’s 10-inch-screen decoders are now supported, for example: X-431 PRO3 V+ 5.0 \X-431 PRO3 (PRO3S+ V5.0)\ APEX. User has already purchased...

Upgraded from LAUNCH X431 Pro MINI, X431 V PRO, PRO3S+ and X431 V+ , as a new member coming into X431 group, LAUNCH scan tool X431 PRO3S+ Elite has inherited all the strengths of its predecessors and greatly developed its advantages like J2534 Programming, 50+ Reset Functions, Bi-directional Control, Online Functions, ECU Coding, All System...

Product Features:Full system diagnostic lifetime free28 maintenance functions lifetime freeThinkTool MINI Support 93 major car brands and 28+ languages6 inch Touch Screen + 2G/32G MemoryWHY CHOOSE THINKTOOL MINI? OE-level Full system diagnostic: read fault codes for all system, such as ECM, TCM, ABS, SRS, BCM, IMM, BMS, TPMS, SAS, Fuel System, Light System, Wiper System,...

Type: 4A-B6, 4A-AA, 4A-BA Frequency: 433.58/434.42   312.09/314.35 Compatible Devices: K518/K518PRO/KW100 Compatible Models:  for Avalon(2025-2026)                                 for Yaris(2025-2026)                                 for Avalon HV(2025-2026) Package includes:1pc x LONSDOR LT32 Series for TOYOTA/LEXUS...

Product Description :1. This is Launch renewal card 2 years update service for Launch V/ V+/ X431 Pro Mini/ ProS Mini/ DIAGUN IV/ 5C/ PRO DYNO/ PRO3S/ PRO52. You can buy it to extend 2 years subscription. Launch Renewal Card 2 Years Update Service for Launch V/ V+/ X431 Pro Mini/ ProS Mini/ DIAGUN IV/...

Product Functions: Designed for 2018-2022 NIO EC6, ES6, and ES8 models, this system features OEM plug-and-play installation requiring no wire cutting or harness modification.By directly connecting to the vehicle's CAN bus via the NlO 16PiN GateWay dedicated wiring harness (C1031), it enables PiN Code-free key programming and works seamiessly with third-party devices. Package includes: 1pc...

The KESS3 is the latest ECU tuning tool from Alientech that replaces both the KESSv2 and K-TAG. KESS3 gives you more control than its predecessors, KESSv2 and K-TAG, and can be upgraded without the need to spend money on new hardware. This new tool allows users to remap in a faster, easier way than ever...

The Creader Professional 719I is a smart, network-enabled diagnostic tool based on the Android platform. It features full-system code reading, code clearing, version information, data stream reading, and actuation tests—perfectly suited for the DIY passenger car market. In addition, it comes with 28 special functions, full OBD functionality, and lifetime free upgrades. It features full-system...

Product Introduction: TOPDON Rlink X7 for Volkswagen supports the OEM ODI-S V23.05 software and ODI-S Engineer v17.01. The OEM diagnostic interface of RLink X7 6154 supports DoIP for Volkswagen, Audi, Skoda, Seat Bentley and Lamborghini. It is compatible with the OEM software of ODI-S. Highlights of RLink X7 for Volkswagen 1.Complete replacement for OEM tools...

The intelligent vehicle diagnostic interface of RLink X7 for Nissan represents the next generation of diagnostic technology. The product uses a newly high-speed processor, fully supports multi-channel CAN-FD/DoIP and traditional diagnostic protocols, and is compatible with more original diagnostic software.The RLink J2534 device fully supports all J2534 protocols, ensuring compatibility with OEM reprogramming and diagnostic...

The TopScan Pro is a pocket-sized tool that turns a phone into a scan tool and keeps up with its users as they go beyond basic scans. Connect the TopScan Pro to the OBD2 port and begin diagnosing through the tool's app. The TopScan Pro excels at the fundamentals. Capable of reading and clearing fault...

Product Introduction: LAUNCH X431 PAD5 ELITE V2 is a new-generation PAD series product built on the Android 15.0 operating system. It features an octa-core high-performance processor, 8GB RAM and 128GB ROM for ample storage, and a high-capacity battery, delivering faster, more stable, and longer-lasting performance. It covers over 98% of vehicles on the market and...

Heavy-duty trucks are not currently supported.  

Xhorse VVDI 754J Smart Key PCB 315MHZ/433MHZ/868MHZ, please note it includes key pcb and key shell now. For Audi A6L Q5 A4L A8L New Version, support 315/ 433/ 868MHZ Switch frequency by software No welding required Support switch frequency using VVDI 2 / KEYTOOL / KEYTOOL MAX / MINI KEYTOOL / KEYTOOL PLUS  Note: Xhorse...

Condition: 100% Brand NewPN: XKHO01ENButton: 3+1 ButtonsKey Blade: NOTransponer Chip: No ChipBattery: NO (Battery model: CR2032)Style: for Honda Type Packing List 5pcs Xhorse XKHO01EN Wire Remote Key

This is a VVDI super chip, the latest Xhorse tool released in 24/04/2019.It's used with VVDI2 sw 6.5.0 for auto key programmingAlso can work with VVDI key tool and mini vvdi key toolIt's original from the Xhorse manufacturerFeatures:One for allPowerfulConvenientCompatibility:VVDI2  v6.5.0 or newer versionVVDI KEY TOOLVVDI MINI KEY TOOLFunction:Can be used as the chips below...

1. The Autel VCI Bluetooth Wireless Diagnostic Interface is Designed for: Repair shop technicians whose original Autel VCI communication adapter is lost, damaged or faulty and need replacement spare‑part Workshops using Autel MaxiSys series diagnostic tablets, requiring stable wireless vehicle‑tablet communication Mobile repair technicians who want wireless freedom to move around vehicle during diagnosis Service...

ISCAN PRO SERIES MARINE User Manual ISCAN PRO INDMAR MARINE COVERAGE  Product Introduction: ISCAN PRO INDMAR (MARINE) is a portable tablet which has super performance and industrial appearance design specialized for INDMAR. It is a new generation of intelligent marine diagnostic equipment tailored for customers. Based on RK3128 quad-core processor and equipped with a 7.0-inch...