Xhorse Multi Prog Programmer with Exclusive Adapters MQB48 Adapters MQB-RH850 Adapter GODIAG ECU GPT Boot AD and G-V ECU Cable Bundle Kit

Xhorse Multi Prog Programmer + Exclusive Adapters + MQB48 Adapters + MQB-RH850 Adapter + GODIAG ECU GPT Boot AD and G-V ECU Cable Bundle Package Kit

Highlights

Bundle Package Includes
Xhorse Multi-Prog Pro-level ECU TCU Programmer

Xhorse Multi-Prog Programmer Adapters XDMP04GL VH24, XDMP05GL VH29, XDMP06GL VH30, XDMP07GL VH31

Xhorse MQB48 No Disassembly No Soldering Full Set Adapters XDNPM3GL

Xhorse Multi-Prog EEPROM and FLASH Adapters 9pcs set

Xhorse XDMPR8GL MQB-RH850/V850 Adapter

GODIAG ECU GPT Boot AD ECU Connector

GODIAG G-V ECU Cable

Xhorse Multi-Prog ECU TCU Programmer Highlights

Fully replaces VVDI Prog
Multi-Prog supports factory mode for batch chip programming, offline programming, and file-based programming. The main difference is that Multi-Prog supports batch programming, while VVDI Prog does not.
Includes free MQB48 license and BMW Bench Read ISN
Can be bound with Xhorse VVDI2 or Key Tool Plus PAD account to enable MQB48 function
Supports ECU read, write, and clone
Supports TCU read, write, and clone
Supports EEPROM, ECU, and MCU operations
Supports reading and writing Bosch ECU ISN with new Bosch ECU adapter
Supports checksum correction for selected EDC16 and EDC17 ECUs
Includes free BMW ISN read function and continuous updates for NEC, MPC, Infineon chips
Built-in MQB48 license. Binding Multi-Prog with VVDI2 full version or Key Tool Plus enables MQB48 NEC35XX function
Free software and firmware updates

Other Features

Supports reading and writing many chip types including MC9S08, MC68HC(9)12, MC9S12, V850, H8X, R8C, PCF79XX, and most EEPROM chips
Supports chip data verification and blank check function
Supports file comparison function
Free PIN code calculation service via dump for various models
Supports reading and writing BMW N20 and N55 ECU with ISN display
Stable support for MC9S12XE series chips such as 5M48H, 1N35H, 2M53J, 3M25J
Supports PCF79XX remote renewal, currently for BMW E/F series (PCF79XX adapter optional)
Large connection diagram database
Reserved ports for future updates
Supports Porsche 12V lithium battery and BYD lithium battery repair (MC9S12XET256)
Supports EDC17 and MED17 checksum calculation
Supports third-party HEX editing scripts
Supports expert mode batch write function

Xhorse XDMPR8GL MQB-RH850/V850 Adapter for Xhorse MULTI-PROG Pro-level Programmer

Highlights:

No need to cut wire or lift pin to read MQB48/MQB49/5C dashboards.

Supported Dashboards:

VW 4th Gen Johnson Controls 34xx series
MQB 34XX series
MQB-RH850(R7F)series

Xhorse Multi-Prog Programmer Adapters XDMP04GL VH24 SOP44 TSOP48 + XDMP05GL VH29 EEPROM FLASH + XDMP06GL VH30 SOP44 + XDMP07GL VH31 TSOP48

Supports soldering to read and write SOP44 package and TSOP48 package parallel FLASH chips, such as AM29FXXX, M29FXXX, TB28FXXX series.
Supports solder-free reading and writing TSOP48 packaged parallel FLASH chips, such as SST36VFXXX, AT49BVXXX, W19BXXX series.
Supports reading and writing common 8-pin chip data.
Supports solder-free reading and writing SOP44 packaged parallel FLASH chips, such as AM29FXXX, M29FXXX, TB28FXXX series.

Xhorse MQB48 No Disassembly No Soldering 13 Full Set Adapters XDNPM3GL

No soldering, no lifting pin, no cutting wire
Do not destroy the original instrument, easy to read data, safer to use.
Easy to read data, more secure to use
Can be used with Muti-PROG, VVDI PROG, Key Tool Plus.

Xhorse Multi Prog Adapters for EEPROM and FLASH 9pcs/set

Package includes adapters XDMP03GL, XDMP09GL, XDMP10GL, XDMP11GL, XDMP12GL, XDMP13GL, XDMP14GL, XDMP15GL, and XDMP16GL. These soldering boards support reading and writing common EEPROM and FLASH chips.

Xhorse XDMP03GL Adapter EEPROM and FLASH Soldering Board supports reading and writing of common EEPROM and FLASH chips.
Xhorse XDMP09GL Adapter TSOP56 chip holder supports TSOP56 footprint for reading, writing, and FLASH operations.
Xhorse XDMP10GL Adapter PQFP80 supports AM29BDD160G with PQFP80 footprint for reading and writing.
Xhorse XDMP11GL Adapter supports ATMEGA103 with TQFP64 footprint for reading and writing.
Xhorse XDMP12GL Adapter MLF28 supports ATMEGA88PA with MLF28 footprint for reading and writing.
Xhorse XDMP13GL Adapter TQFP32 supports ATMEGA88PA with TQFP32 footprint for reading and writing.
Xhorse XDMP14GL Adapter TQFP44 supports ATMEGA163 with TQFP44 footprint for reading and writing.
Xhorse XDMP15GL Adapter TQFP100 supports ATMEGA3250 with TQFP100 footprint for reading and writing.
Xhorse XDMP16GL Adapter SOP48 supports ATMEGA3250 with TQFP100 footprint for reading and writing.

GODIAG ECU GPT Boot Adapter Features

The GODIAG ECU GPT Boot AD programming adapter allows reading and writing ECU data without ECU disassembly using OBD2 Bench or GPT Bench methods, or by using the Boot method after disassembly. It includes a short-circuit protection BOOT resistor board connection cable to protect the ECU. It can be used with J2534 devices and PCMFlash software.

Supports ECU dedicated connection terminals
Supports manual ignition power control
ECU interface cables are clearly labeled
Supports ECU conversion to OBD2 mode for data reading and writing
Supports RESET, BOOT, CNF1, GPT1, GPT2, 5V, 3.3V, VPP, and GND
Supports PCMFlash automatic ignition power control
Supports ECU Boot mode for data reading and writing
CAN bus switch with 120Ω resistor selection
Supports GPT read and write without ECU disassembly
Includes BOOT resistor board connection cable with anti-loss design

GODIAG ECU GPT Boot Adapter Functions

Supports standard OBD2 diagnostic protocols
Supports ECU read and write with J2534 devices
Supports Scanmatik 2 PRO for PCMFlash Module 71 GPT1 and GPT2 signals
Also compatible with Scanmatik OpenPort 2.0, Mongoose JLR, MongoosePro JLR, Teradyne GNA600 (VCM1), and Mazda VCM2 for OBD2 or BOOT mode ECU data operations

GODIAG G-V ECU Cable

GODIAG G-V ECU Cable is used to connect  Xhorse MULTI PROG with GT107 or GT107+ GPT BENCH BOOT to read and write data on VAG gearbox ECU and engine ECU, clone ECU.

Package Includes:

1pc x Multi-PROG
1pc x USB Cable
1pc x Power Adapter (15V 4A)
1pc x 220V Power Cord
1pc x VH13 Interface Adapter Board
1pc x VH20 Interface Adapter Board
1pc x VH23 Interface Adapter Board
1pc x MCU Adapter Multi-PROG Solder Cable
1pc x MCU DB15 Adapter Cable
1pc x ECU Adapter Multi-PROG Solder Cable
1pc x ECU DB15 Adapter Cable
1pc x Multi-PROG OBD Cable
1pc x USB WIFI Network Card
1pc x Product Manual
1pc x Certificate Of Conformity
43pcs x ECU Cable Plugs

13pcs x Xhorse MQB48 adapters XDNPM3GL

1pc x Xhorse XDMPR8GL MQB-RH850/V850 Adapter for Xhorse MULTI-PROG Pro-level Programmer

1pc x XDMP03GL
1pc x XDMP09GL
1pc x XDMP10GL
1pc x XDMP11GL
1pc x XDMP12GL
1pc x XDMP13GL
1pc x XDMP14GL
1pc x XDMP15GL
1pc x XDMP16GL

1pc x Xhorse XDMP04GL VH24
1pc x Xhorse XDMP05GL VH29
1pc x Xhorse XDMP06GL VH30
1pc x Xhorse XDMP07GL VH31

1pc x GODIAG ECU GPT Boot AD Programming Adapter