Prodotti

Flex Heavy-Duty (FLS0.15M) è la soluzione ideale per eseguire operazioni di lettura e scrittura con Flex su tutte le principali categorie di veicoli pesanti. Grazie a questo pacchetto, puoi lavorare in modo rapido e professionale su camion, veicoli industriali, macchine agricole, attrezzature per l’edilizia e autobus. Tutti i modi di connessione supportati sono disponibili in...

Consulta l’elenco dei veicoli FLEX Tutti i protocolli OBD e Bench per le ECU sono stati raggruppati in questo pacchetto software.Multilingue: inglese, cinese, italiano, tedesco, russo, polacco, coreano, spagnolo, portoghese, olandese, francese, greco, rumeno, turco, serbo Si noti che si tratta di un’attivazione online, quindi non è necessaria alcuna spedizione fisica.La licenza FLS0.1M deve essere...

Tutti i protocolli OBD e Bench per le ECU sono stati raggruppati in questo pacchetto software. ECU OBD/Bench (auto, moto, furgoni) MASTERAttivando questo pacchetto software per FLEX, l’utente può lavorare su tutti i protocolli supportati per le ECU di auto, motociclette e furgoni in modalità OBD e Bench. Grazie all’hardware FLEX all’avanguardia, la programmazione in...

Nota: Pacchetto completo delle funzioni software per FLEX nella versione Master. L’hardware FLEX non è incluso.Attualmente FLEX supporta più di 22.000 veicoli. Il pacchetto completo delle funzioni software per FLEX nella versione Master include: ECU OBD, TCU OBD/Bench, BDM MPC5xx, Bench BOSCH MEDC17 + Bootloader Tricore, BL Nexus MPC5xxx, Renesas SH705x, BL Siemens C165/166/167, BL...

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD, Bench and boot mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content.

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD and Bench mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content.

The FLS0.3S software package allows the SLAVE user to work on BDM and Bench protocols. This programming mode is used for communication with ECUs that mount the Motorola MPC5xx family of microprocessors. This type of microprocessor can generally be found on older generation vehicles fitted with EDC16 or MED9 ECUs. MAGICMOTORSPORT recommends that this SW...

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD and Bench mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content. Software  DESC Master / Slave FLS0.1M Software Flex ECU (cars, vans, bikes) OBD...

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD and Bench mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content.

Product DescriptionFLEX currently supports more than 22,000 vehicles. The Full package of software functions for FLEX in Slave version includes: ECU OBD, TCU OBD/Bench, BDM MPC5xx, Bench BOSCH MEDC17 + Bootloader Tricore, BL Nexus MPC5xxx, Renesas SH705x, BL Siemens C165/166/167, BL ST10, JTAG NEC 76F00xx & Infineon TC17xx Made specifically for the FLEX FLK02 MagicMotorsport -...

The FLS0.6M software package contains all the protocols for work in OBD and Bench on ECUs that mount Renesas SH7xxxx microprocessors. This family of microprocessors is generally supported by DENSO and Continental. This MASTER SW package also includes protocols for work on Kubota tractors via OBD and Bench as well. Thanks to the functions of...

The FLS0.6S software package contains all the protocols for work in OBD and Bench on ECUs that mount Renesas SH7xxxx microprocessors. This family of microprocessors is generally supported by DENSO and Continental. This MASTER SW package also includes protocols for work on Kubota tractors via OBD and Bench as well. Thanks to the functions of...

This FLEX SW package allows work in Bootloader / Bench mode on all control units that mount C165/166/167 Siemens microprocessors. This family of microprocessors is generally supported by older generation ECUs like ME7 and EDC15.

This FLEX SW package allows work in Bootloader / Bench mode on all control units that mount C165/166/167 Siemens microprocessors. This family of microprocessors is generally supported by older generation ECUs like ME7 and EDC15.

This FLEX SW package allows work in Bootloader / Bench mode on control units that mount ST10F2xx microprocessors. This family of microprocessors is generally supported by Marelli in older generation models, such as IAW, and is often equipped with an internal Flash.

This FLEX SW package allows work in Bootloader / Bench mode on control units that mount ST10F2xx microprocessors. This family of microprocessors is generally supported by Marelli in older generation models, such as IAW, and is often equipped with an internal Flash.

This software package includes protocols for work in JTAG AUD on engine control units that mount NEC76F00xx microprocessors. This family of microprocessors can be found in Toyota Denso 275xxx or 175xxx engine control units. This SW package makes it possible to communicate with the supported units through the JTAG port so in this case, it...

This software package includes protocols for work in JTAG AUD on engine control units that mount NEC76F00xx microprocessors. This family of microprocessors can be found in Toyota Denso 275xxx or 175xxx engine control units. This SW package makes it possible to communicate with the supported units through the JTAG port so in this case, it...

FLEX supporta attualmente più di 22.000 veicoli. Il pacchetto completo delle funzioni software per FLEX in versione Slave include: ECU OBD, TCU OBD/Bench, BDM MPC5xx, Bench BOSCH MEDC17 + Bootloader Tricore, BL Nexus MPC5xxx, Renesas SH705x, BL Siemens C165/166/167, BL ST10, JTAG NEC 76F00xx e Infineon TC17xxVersione: MagicMotorsport Magic FLK02 +Attivazione per la versione Master...

Complete Bench - Boot MEDC17 software package for programming BOSCH MEDC17 ECUs directly from the engine control unit connector.SOFTWARE FLEX INFINEON Bench/Boot TC17XX – MASTERWith the Bench / Boot MEDC17 Software package, you can now program a great deal of BOSCH MEDC17 controllers directly from the ECU connector without opening the unit. You will never...

Complete Bench/Boot MEDC17 software package for programming BOSCH MEDC17 ECUs directly from the engine control unit connector.SOFTWARE FLEX INFINEON TC17XX  Bench/Boot – SLAVEWith the Bench/Boot MEDC17 Software package, you can now program a great deal of BOSCH MEDC17 controllers directly from the ECU connector without opening the unit. You will never damage a BOSCH MEDC17...

MASTERThe FLEX Master tool has no limitation of file formats. The Master user works with plaintext files and .bin formats that are both editable with any type of software. Furthermore, the Master hasthe possibility to use the file modification services offered by MAGICMOTORSPORT and have access to 300 free Green coins per month as well...

The FLS0.3M software package allows the MASTER user to work on BDM and Bench protocols. This programming mode is used for communication with ECUs that mount the Motorola MPC5xx family of microprocessors. This type of microprocessor can generally be found on older generation vehicles fitted with EDC16 or MED9 ECUs. MAGICMOTORSPORT recommends that this SW...

1 anno di aggiornamenti software gratuiti.  Abbonamento 959USD all'anno per la versione Master. La confezione contiene kit hardware FLK02 FLEX Full HW + pacchetto software Full Flex Master. Introduzione al prodotto:Flex è un programmatore innovativo per le officine meccatroniche e supporta gli sviluppi più recenti nel settore del tuning e della riparazione dei veicoli. Ora è completamente...