5 Pieces of Replacement GODIAG NFC Key Cards, For Tesla, For BMW, For Xpeng, For AITO, For NIO, For BYD, and More

How to Use it?
 

Step 1: Use a device to test the old NFC card; the test result shows no signal. Take out the NFC replacement card.

Step 2: Cut the chip from the chip location on the old NFC card.

Important Reminder: Before starting to cut an old NFC card, be sure to know the location of the chip, otherwise you may accidentally damage it.

Note: Be sure to find the chip location on the old NFC card.

 

Step 3: Place the cut chip in a plastic solvent and soak for 5-10 minutes.

Step 4: Use a heat gun and tweezers to remove the plastic sheet covering the chip.

Step 5: The complete chip is now obtained.

Step 6: Solder the chip onto the new NFC replacement card.

Steps 7: Use a curing agent and UV lamp to fix the chip.

Step 8: Attach the decorative protective plates to both sides.

Step 9: Use a device to test the new NFC card; the test result shows a signal.