CG100 Prog III Full Version Airbag Restore Device including All Functions of Renesas SRS and Infineon XC236x FLASH

CG100 PROG III – Complete Airbag & ECU Restoration System

Key Features:

1. Comprehensive Renesas SRS Support – Includes all Renesas‑based airbag module functions.

2. EEPROM & Microcontroller Access – Reads/writes EEPROM and supports non‑secure BMW DDME ECUs.

3. Integrated Calculator – Built‑in tool for calculating ISN, VIN, and programming CRC‑protected EEPROMs.

4. BMW CAS Key Programming – Supports CAS3, CAS3+, CAS4, and CAS4+ immobilizer systems.

5. CAS Data Verification – Analyzes and validates the integrity of CAS module data.

6. Included ATMEGA Adapter – Adapter for ATMEL‑based modules is provided in the package.

CG100 ATMEGA Adapter – for CG100 PROG III Airbag & ECU Restoration

Supported Chips & Functions:

35080 EEPROM Series:
M35080DQ080, M35080DQ160, M35080 3/6, M35080 V6/VP
*(Mileage adjustment in 5 seconds via direct read/write)*

ATMEGA Parallel Programming:
MEGA8L, MEGA48, MEGA88, MEGA16, MEGA32, MEGA169
(Can erase and reuse second‑hand ATMEGA8L chips)

24‑Series EEPROM:
24C01, 24C02, 24C04, 24C08, 24C16, 24C32, 24C64, 24C128 (read/write)

93‑Series EEPROM:
93C46, 93C56, 93C57, 93C66, 93C76, 93C86 (read/write)

25‑Series SPI Flash:
25010, 25020, 25040, 25080, 25160, 25320, 25640, 25128, 25256 (read/write)

95‑Series SPI Flash:
95010, 95020, 95040, 95080, 95160, 95320, 95640, 95128, 95256, 95512 (read/write)

Additional 9S08GL16 CPU Parallel Flash Support:
AMD AM29BL802D (can erase FAW REIZ MT34 immobilizer chips)

Software Features:

• Wizard‑style interface for guided operation.

• Free data editing – write custom values as needed.

• Automatic MCU pin detection and identification.

• Full support for CPU‑based airbag module repair.

Supported Operating Systems: Windows XP, 7, 8, 11 (32‑bit & 64‑bit)

1. Renesas CPU Support – Used in: Toyota, Honda, Subaru
Models: R5F61797, RF61725, R5F61723, R5F61721

2. Infineon XC236x Series Support – Used in: Nissan, Suzuki, Hyundai, Ford, Mazda, Land Rover, Jaguar, GM
Models: XC2060N‑40F, XC2060M‑104F, XC2336B‑24F, XC2336B‑40F, XC2361A‑56F, XC2361A‑72F, XC2361E‑72F, XC2363A‑56F, XC2363A‑72F, XC2364A‑56F, XC2364A‑72F, XC2364A‑104F, XC2365A‑56F, XC2365A‑72F, XC2365A‑104F, XC2361B‑24F, XC2361B‑40F, XC2363B‑24F, XC2364B‑24F, XC2364B‑40F, XC2365B‑24F, XC2365B‑40F
*Read/Write Speed: 20 seconds – currently the fastest worldwide.*

3. Freescale CPU Support – Used in: Honda
Model: MPC5604P (0M26V, 1M36W)

4. ST CPU Support – Used in: Volkswagen
Model: SPC560

5. ATMEGA CPU Support – Mileage Adjustment for Instrument Clusters
Models: ATMEGA169, ATMEGA32, ATMEGA16, ATMEGA8, ATMEGA88, ATMEGA48

CG100 PROG Airbag Restore Device – Supported MCU Models

• Renesas: R5F61721, R5F61723, R5F61725, R5F61797

• Infineon XC23xx Series: XC2336A, XC2336B, XC2361A, XC2361B, XC2361E, XC2360A, XC2360B, XC2387C, XC2320S, XC2310S
  *Read/Write time: 25 seconds*

• Freescale: MPC5604 (0M26V)

• ST: SPC560P50

CG100 PROG III Update Policy

1. First Year: Free online updates.

2. After First Year: Annual update service is $118. If you choose not to renew, the device continues to function on the last installed version.

3. Legacy Devices: If your CG100 is running a very old software version, please first update to V6.0.0.0, then install the latest release.

CG100 PROG III Update Information:  

V7.4.0.0 Paid Version (2025.09.30)
1. Added 20 models to dashboard.
2. Added 5 models to airbag.
3. Added 14 models to read-write.

V7.3.8.0  Paid Version (2025.09.03)
1. Added 12 models to dashboard.
2. Added 3 models to airbag.
3. Added 11 models to read-write.

V7.3.7.0  Paid Version (2025.08.23)
1. Added 14 models to dashboard.
2. Added 5 models to airbag.
3. Added 3 models to read-write.

V7.3.6.0  Paid Version (2025.08.02)
1. Added 14 models to dashboard.
2. Added 4 models to airbag.
3. Added 6 models to read-write.

CG100 Prog III V7.3.5.0 Paid Version 2025.07.23)
1. Added 19 models to dashboard.
2. Added 4 models to read-write.

CG100 Prog III V7.3.4.0 Paid Version (2025.07.14)
1. Added 20 models to dashboard.
2. Added 1 models to read-write.

CG100 Prog III V7.3.3.0 Paid Version (2025.07.01)
1. Added 6 models to dashboard.
2. Added 7 models to airbag.
3. Added 1 models to Body repair.
4. Added 4 models to read-write.

CG100 Prog III V7.3.2.0 Paid Version (2025.06.17)
1. Added 15 models to dashboard.
2. Added 3 models to read-write.

CG100 Prog III V7.3.1.0 Paid Version (2025.06.05)
1. Added 16 models to dashboard.
2. Added 2 models to read-write

CG100 Prog III V7.3.0.0 Paid Version (2025.05.21)
1. Added 5 models to dashboard.
2. Added 8 models to airbag.
3. Added 3 models to Body repair
4. Added11 models to read-write

CG100 Prog III V7.2.9.0 Paid Version (2025.04.30)
1. Added 17 models to dashboard.
2. Added 5 models to read-write.

CG100 Prog III V7.2.8.0 Paid Version (2025.04.21)
1. Added 19 models to dashboard.
2. Added 4 models to read-write.

CG100 Prog III V7.2.7.1 Paid Version (2025.04.14)
1. Added 24 models to dashboard.

CG100 Prog III V7.2.6.0 Paid Version (2025.04.01)
1. Added 16 models to dashboard.
2. Added 1 models to airbag.
3. Added 7 models to read-write.

CG100 Prog III V7.2.5.0 Paid Version (2025.03.25)
1. Added 21 models to dashboard.
2. Added 2 models to read-write.

CG100 Prog III V7.2.4.0 Paid Version (2025.03.22)
1. Added 26 models to dashboard.
2. Added 1 models to read-write.

CG100 Prog III V7.2.3.0 Paid Version New (2025.03.10)
1. Added 7 models to dashboard.
2. Added 8 models to airbag.
3. Added 6 models to read-write.

CG100 Prog III V7.2.2.0 Paid Version (2025.02.28)
1. Added 10 models to dashboard.
2. Added 1 models to Body repair.
3. Added 13 models to read-write.

CG100 Prog III V7.2.1.0  Paid Version (2025.02.22)
1. Added 21 models to dashboard.
2. Added 1 models to read-write.

CG100 Prog III V7.2.0.0  Paid Version (2025.02.15)
1. Added 8 models to dashboard.
2. Added 6 models to airbag.
3. Added 9 models to read-write.

CG100 Prog III V7.1.9.0  Paid Version (2025.02.08)
1. Added 16 models to dashboard.
2. Added 5 models to read-write.

CG100 Prog III V7.1.8.0  Paid Version (2025.01.20)
1. Added 19 models to dashboard.
2. Added 4 models to read-write.

CG100 Prog III V7.1.7.0  Paid Version (2025.01.11)
1. Added 26 models to dashboard.
2. Added 2 models to read-write.

CG100 Prog III V7.1.6.0  Paid Version (2025.01.04)
1. Added 10 models to dashboard.
2. Added 4 models to airbag.
3. Added 1 models to Body repair.
4. Added 10 models to read-write.

CG100 Prog III V7.1.5.0  Paid Version (2024.12.28)
1. Added 39 models to dashboard.
2. Added 8 models to read-write.

CG100 Prog III V7.1.4.0  Paid Version (2024.12.23)
1. Added 24 models to dashboard.
2. Added 15 models to airbag.
3. Added 5 models to read-write.

CG100 Prog III V7.1.3.0  Paid Version (2024.11.30)
1. Added 16 models to dashboard.
2. Added 4 models to airbag.
3. Added 2 models to read-write.

V7.1.2.0  Paid Version NEW (2024.11.25)
1. Added 18 models to dashboard.
2. Added 3 models to read-write.

V7.1.1.0  Paid Version (2024.11.16)
1. Added 23 models to dashboard.
2. Added 2 models to read-write.

V7.1.0.0 Paid Version (2024.11.13)
1. Added 3 models to dashboard.
2. Added 14 models to airbag.
3. Added 32 models to read-write.

V7.0.9.0  Paid Version (2024.10.29)
1. Added 24 models to dashboard.
2. Added 1 models to airbag.
3. Added 6 models to read-write.

V7.0.8.1  Paid Version (2024.10.17)
1. Added 28 models to dashboard.
2. Added 1 models to read-write.

V7.0.7.0 (2024.09.28)
1. Added 25 models to dashboard.
2. Added 1 models to read-write.

V7.0.6.0 (2024.09.20)
1. Added 11 models to airbag.
2. Added 12 models to read-write.

V7.0.5.0 (2024.09.07)
1. Added 15 models to dashboard.
2. Added 1 models to airbag.
3. Added 7 models to read-write.

V7.0.4.0 (2024.08.31)
1. Added 28 models to dashboard.

V7.0.3.0 (2024.08.23)
1. Added 31 models to dashboard.
2. Added 1 models to Body repair.

V7.0.2.0 (2024.08.03)
1.Added 57 models to dashboard.
2.Added 26 models to airbag.
3.Added 29 models to read-write.
4.Added 1 models to Body repair.

CG100 PROG III Full Version Package Contents:

• 1 × CG100 PROG III Programmer

• 1 × BDM+4 Adapter

• 1 × CAN Adapter

• 12 × Welding Cables

• 1 × USB Cable

• 1 × 12V Power Adapter

• 1 × ATMEGA Adapter

• 1 × EEPROM Adapter

• 1 × AVR Adapter

• 1 × AVR V2.0 Adapter

• 1 × EEPROM‑SO Adapter

• 1 × FLASH Adapter