GODIAG G-A ECU/TCU Cable for Connecting AUTEL IM608 IM508 with GT107/GODIAG ECU GPT Adapter to Read & Write Data
Godiag

GODIAG G-A ECU/TCU Cable for Connecting AUTEL IM608 IM508 with GT107/GODIAG ECU GPT Adapter to Read & Write Data

SKU HKSF411 In stock Ships from US warehouse
$19.00 USD
$19.99 USD $19.00 USD

Sourced through authorized channels. Serial verifiable with the manufacturer.

  • 12-month warranty
  • Technical support in English, Mon–Sat
Not sure this fits your job? Talk to a technician

Overview

1. The GODIAG G-A ECU/TCU cable is designed for:
  • Professional auto electronic repair shops specializing in VAG engine & DSG transmission ECU repair, data recovery and ECU cloning
  • Auto locksmiths equipped with Autel IM508 / IM608 for bench all-keys-lost programming on VW, Audi, Seat, Skoda
  • Technicians owning GODIAG GT107 / GT107+ / GPT boot bench equipment needing stable ECU bench connection
  • Maintenance stores handling common DQ200/DQ250/DQ380/DQ500 transmission fault repair and data backup
  • Global aftermarket repairers who need a cost-effective dedicated harness matching Autel VAG bench programming workflow
 
The Connection Diagram
 
1. To read DQ250 with Autel IM608 & GT107+

2. To read DQ200 with Autel IM608 & GT107+

3.To read MED17.5 with Autel IM608 & GT107+

2. Supported Key Functions & Features

ECU/TCU Data Operations

• Connect AUTEL IM608/IM508 with GODIAG GT107, GT107+, or ECU GPT Boot Adapter
• Read ECU data
• Write ECU data
• Clone ECU data
• Perform ECU/TCU bench communication

Transmission ECU Support

Supports VAG gearbox control units including:

• DQ200 DTC1766
• DQ200_G2_PQ TC1784
• DQ250_MQB TC1766
• DQ380
• DQ500 (Continental) TC1766

Engine ECU Support

Supports various VAG engine ECU models, including:

• EDC17 series
• ME17 series
• MED17 series

Examples:

• EDC17C46 TC1767
• EDC17C54 TC1797
• EDC17C64 TC1797
• EDC17C74 TC1793S
• EDC17CP14 TC1796
• EDC17CP20 TC1796
• EDC17CP24 TC1796
• EDC17CP44 TC1797
• EDC17U01 TC1766
• EDC17U05 TC1796
• ME17.1.1 TC1797
• ME17.1.6 TC1797
• ME17.5.20 TC1767
• ME17.5.22 TC1724N
• ME17.5.24 TC1724N
• ME17.5.26 TC1724N
• MED17.1.1 TC1797
• MED17.1.6 TC1797
• MED17.5 TC1766
• MED17.5.1 TC1766
• MED17.5.2 TC1767
• MED17.5.20 TC1766
• MED17.5.21 TC1782
• MED17.5.25 TC1782

Professional Connection Features

• Stable ECU/TCU bench connection
• Supports ECU cloning preparation
• Supports ECU replacement operations with compatible tools
• Reduces the risk of unstable communication during programming

3. What Vehicles Does It Support?

GODIAG G-A ECU/TCU Cable is mainly designed for Volkswagen Group vehicles.

Supported Vehicle Brands

• Volkswagen (VW)
• Audi
• Seat
• Skoda

Supported Vehicle Systems

• Engine Control Unit (ECU)
• Transmission Control Unit (TCU)
• Gearbox Control Module

Supported ECU Platforms

• Bosch EDC17 series
• Bosch ME17 series
• Bosch MED17 series
• VAG DQ gearbox ECU series

Supported Communication Environment

• ECU Bench Mode
• GPT Boot Mode (with compatible adapter)

Note:
Due to the large number of supported ECU models, not all models are listed. Please check the connected programming software database for complete compatibility information.

4. Please Note the Following Limitations
  • Only works with Autel IM508 / IM608 series programmers; incompatible with Xhorse, Launch, OBDSTAR and other brand key tools
  • Must cooperate with GODIAG GT107 / GT107+ / ECU GPT Boot bench adapter; cannot be used alone without bench equipment
  • Exclusive for VAG group vehicles; does not support BMW, Mercedes, Japanese, Korean and other non-VAG ECUs
  • Not applicable for motorcycle ECU, heavy truck control units and new energy vehicle power modules
  • Cannot perform on-car OBD direct reading; only supports off-bench ECU data operation
  • Ultra-new encrypted VAG ECUs may rely on Autel official software database updates
5. Hardware Accessories & Licensing Requirements
  • Authorization & Activation: The cable itself requires no registration, activation code or annual license fee
  • Extra Mandatory Equipment:
    1. Autel IM508 or IM608 professional key programmer
    2. GODIAG GT107 / GT107+ or ECU GPT Boot bench test adapter
  • Extra Optional Accessories: Bench 12V power supply (prepared separately by user)
  • No additional conversion cables required for matching supported ECUs
6. GODIAG G-A ECU/TCU Cable Specification
  • Matching Programmer: Autel IM508, Autel IM608
  • Matching Bench Device: GODIAG GT107, GT107+, ECU GPT Boot Adapter
  • Compatible Chips: TC1724, TC1766, TC1767, TC1782, TC1793, TC1796, TC1797 series
  • Applicable ECU: VAG MED17 / EDC17 engine ECU, DQ series DSG TCU
  • Wire Material: Shielded anti-interference harness
  • Net Weight: 92g
  • Outer Package Size: 22cm * 5cm * 3cm
7. Software Update
  • Update Object: This connection cable is a passive hardware harness with no built-in firmware to update
  • Update Carrier: All newly added compatible ECU models depend on Autel IM508 / IM608 official software database upgrades
  • Update Cost: Software update fees follow Autel’s official policy; no extra charge from this cable
  • Free Update Term: Hardware harness has no update expiration limit permanently
8. Global Version

Full unrestricted global version without regional lock. No area usage limits, compatible with all global official versions of Autel IM series programmers for worldwide repair workshops.

9. Warranty

12-month hardware warranty against manufacturing defects (wire breakage, connector poor contact under normal use). Damage caused by man-made pulling, overvoltage short circuit and wrong wiring is not covered by warranty. Lifetime online technical guidance for wiring matching and bench operation steps.

10. Package List
 
1pc x GODIAG G-A ECU/TCU cable

In the box

Weight
0.092 kg
Package size
22cm*5cm*3cm ( Inch: 8.66*1.97*1.18 )

Related products