GODIAG VAG Test Platform GT110 + GT111 CAN-Bus POGO Pin for VW Audi Skoda Seat 3rd 3.5th 4th Gen Dashboard IMMO Immobilizer Key Programming Matching Tool OBD Key Programmer

GODIAG VAG Test Platform GT110 + GT111 CAN-Bus with POGO PIN for 3rd, 3.5th & 4th Gen VAG Immobilizer Key Programming

GODIAG Bundle Overview:

GODIAG GT111: Designed for VW, Skoda, and Seat vehicles with 3rd and 3.5th generation instrument clusters, this platform uses POGO PIN technology for safe offline data reading and writing. Core functions include key and immobilizer (IMMO) instrument synchronization testing, intelligent IMMO emergency start zone detection, offline instrument cluster diagnostics, IMMO data read/write, mileage correction, and key programming.

GODIAG GT110: Supports VW, Skoda, and Seat vehicles with 4th generation UDS-based immobilizer systems. It enables offline POGO PIN data operations and dashboard key programming, including boot probe access, for all Volkswagen Group UDS systems. Key features include real-time voltage and current display, dedicated power switch, simulated ignition switch, start/stop buzzer, CANH/UDS communication indicators, CR2032 remote key battery testing, key-instrument synchronization, intelligent IMMO emergency start detection, offline cluster diagnostics, IMMO data read/write, mileage correction, and key matching.

Compatible Tools: Works with HEX-V2/VCDS (VAG-COM 5053), VAS 5054A, VAS 6154, SUPER VAG K+CAN, Obdstar, Lonsdor, Abrites (AVDI), ZEDFULL, VVDI2, Key Tool Plus, X300 DP Plus, AUTEL, and other diagnostic devices.

Product Features:

1. POGO PIN Interface: Stable, non-damaging connection for safe instrument cluster read/write operations.
2. Offline Dashboard Interface: Direct offline connection to the instrument cluster, converting it to a standard OBD-II port.
3. Key/Instrument Synchronization Test: Verifies transponder chip and immobilizer instrument matching.
4. Dedicated Power Switch: Independent power control.
5. Simulated Ignition Switch: Allows simulation of vehicle ignition.
6. Live Voltage Display: Shows real-time operating voltage.
7. CR2032 Key Fob Battery Test: Checks remote key fob battery status.
8. Live Current Display: Displays real-time working current.
9. CANH/UDS Communication Indicator: LED indicates CAN High line or UDS protocol activity.
10. Key Detection Adapter with Indicator Light: Identifies keys with a visual signal.
11. Secure POGO PIN Connection: Provides stable contact without damaging cables or circuit boards.

Intelligent IMMO Emergency Start Zone Detection:
Place the key identifier near different areas of the dashboard/console while pressing the vehicle start button. If the indicator flashes or lights up, that area is the emergency start induction zone. Dead smart key batteries can be placed in this zone to start the vehicle.

Vehicle IMMO & Transponder Chip Test Results:

• Light flashes briefly then turns off: IMMO chip and key transponder are synchronized and functioning correctly.
• Light flashes continuously: Key transponder is not recognized or matched. Re-synchronization or programming required.
• Light does not flash: Possible fault in the vehicle’s IMMO system. Further diagnostics needed.

Package Includes:

• 1 x GODIAG GT111 Test Platform Cable (3rd/3.5th Gen)
• 1 x GODIAG GT110 Test Platform Cable (4th Gen UDS)