Xhorse Mercedes Benz Password Calculation Unlimited Token for One Year Period Works for VVDI MB BGA and Key Tool Plus Pad

Xhorse Mercedes-Benz Password Calculation Unlimited Token for One Year Period

Overview

This one-year unlimited token license supports online password calculation through the EIS and a working key.

Features:

• Supports password calculation for CAN protocol EIS systems.
• Compatible with BGA keys and other NEC keys.
• Supports password calculation for NEC V51 and V57 keys using a solder-free method.

Processing Time:

• Data acquisition time depends on the key version and typically takes approximately 3.5 to 13 minutes.
• Most BGA key versions require about 5 minutes, while some versions can be completed in as little as 3.5 minutes.
• Server-side password calculation usually takes 30 seconds to 1 minute.

Supported Types

• W164
• W164 (2009-)
• W166, W197, W212, W218, W246
• W169, W209, W211
• W172, W204, W207
• W216
• W221
• W639 (2009-)

Functions

Communication Mode:

Supports OBD mode and IR Adapter mode for communication with the EIS.

Chassis Selection:

Select the chassis number manually or use the Auto Detect function in the EIS Tools menu.

Data Acquisition:

Click "Data Acquisition" to automatically perform the following steps:

1. Insert the working key into the ignition and wait for 15 seconds.
2. Insert the working key into the device IR reader for key and vehicle verification.
3. Start data acquisition.
4. Insert the working key into the ignition again and wait for 30 seconds.
5. Insert the working key into the device IR reader and wait for the process to complete.
6. Save the acquired data.

Upload Data:

Upload the saved acquisition data to the server for password calculation.

Attention:

Once the password for a specific SSID has been successfully calculated, the server will not accept another calculation request using the same SSID within the next two hours. After two hours, uploading acquisition data with the same SSID will create a new calculation task.

Query Result:

Use the Query Result function to check the server calculation status. Once the calculation is completed successfully, the password will automatically appear in the key password field. The "Copy" button can be used to copy the password to the clipboard.

Auto Refresh:

The software automatically refreshes the server results until there are no pending tasks for the device. While auto refresh is running, you can start a new data acquisition process.

Stop Acquisition After Success:

If data acquisition is running while Auto Refresh detects the correct password, the software will automatically stop the acquisition process.

Query Result Status

The Query Result function allows users to check calculation results within 24 hours. The result screen displays the Time, SSID, Status, and Filename used when uploading to the server.

Status Types:

1. Queuing: Number X, requires approximately Y minutes. This means your task is waiting in the queue.
2. Processing: Requires approximately 1 minute. This means the calculation is in progress.
3. Password: XXXXXXXXXXXXXXXX (Free). This indicates the password has been successfully calculated. "Free" means the task was processed without additional cost or the password was previously calculated.
4. Discard: If the password has already been successfully calculated, any upload using the same SSID within two hours will be discarded.
5. Already Uploaded: The server has already received this file and it is currently in the queue.
6. Pay for Password Calculation Before Upload: Your device does not have password calculation authorization. Please contact your dealer to activate this function.
7. Failed: The server was unable to calculate the password. You can perform data acquisition again. Failed tasks are always free.