Ürünler

Flex Heavy-Duty (FLS0.15M), Flex ile ağır vasıta kategorilerinin tümünde okuma ve yazma işlemleri yapmak için ideal çözümdür. Bu paket sayesinde kamyonlar, endüstriyel araçlar, tarım makineleri, inşaat ekipmanları ve otobüslerde hızlı ve profesyonel çalışabilirsiniz. Bu yazılım lisansında desteklenen tüm bağlantı modları mevcuttur: OBD, OBD Full, Bench ve Boot. Bosch, Cummins, Denso, TRW, Continental gibi markaların ECU,...

Flex Araç Listesini Kontrol Et ECU için tüm OBD ve Bench protokolleri bu yazılım paketinde gruplandırılmıştır.Çok dilli: İngilizce, Çince, İtalyanca, Almanca, Rusça, Lehçe, Korece, İspanyolca, Portekizce, Felemenkçe, Fransızca, Yunanca, Rumence, Türkçe, Sırpça Bu işlemin çevrim içi aktivasyon olduğunu ve fiziksel gönderim gerektirmediğini lütfen unutmayın.FLS0.1M lisansı, FLEX Programlayıcı ile birlikte satın alınmalıdır. OBD/Bench ECU'lar (otomobiller, motosikletler,...

ECU için tüm OBD ve Bench protokolleri bu yazılım paketinde bir araya getirilmiştir. OBD/Bench ECU’lar (otomobiller, motosikletler, minibüsler) MASTERFLEX için bu yazılım paketi etkinleştirildiğinde kullanıcı, otomobil, motosiklet ve minibüslerdeki ECU’lar için OBD ve Bench modlarında desteklenen tüm protokoller üzerinde çalışabilir. En son teknoloji FLEX donanımı sayesinde Bench modunda programlama, kontrol ünitesinin açılmasına gerek kalmadan içeriğinin...

Not: Master sürümündeki FLEX için eksiksiz yazılım işlevleri paketi. FLEX donanımı dahil değildir.FLEX şu anda 22.000’den fazla aracı desteklemektedir. Master sürümündeki FLEX için eksiksiz yazılım işlevleri paketi şunları içerir: ECU OBD, TCU OBD/Bench, BDM MPC5xx, Bench BOSCH MEDC17 + Bootloader Tricore, BL Nexus MPC5xxx, Renesas SH705x, BL Siemens C165/166/167, BL ST10, JTAG NEC 76F00xx ve...

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD, Bench and boot mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content.

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD and Bench mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content.

The FLS0.3S software package allows the SLAVE user to work on BDM and Bench protocols. This programming mode is used for communication with ECUs that mount the Motorola MPC5xx family of microprocessors. This type of microprocessor can generally be found on older generation vehicles fitted with EDC16 or MED9 ECUs. MAGICMOTORSPORT recommends that this SW...

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD and Bench mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content. Software  DESC Master / Slave FLS0.1M Software Flex ECU (cars, vans, bikes) OBD...

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD and Bench mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content.

Ürün AçıklamasıFLEX şu anda 22.000’den fazla aracı desteklemektedir. FLEX’in Slave sürümündeki eksiksiz yazılım işlevleri paketi şunları içerir: ECU OBD, TCU OBD/Bench, BDM MPC5xx, Bench BOSCH MEDC17 + Bootloader Tricore, BL Nexus MPC5xxx, Renesas SH705x, BL Siemens C165/166/167, BL ST10, JTAG NEC 76F00xx ve Infineon TC17xx Şunlar için özel olarak geliştirilmiştir: FLEX FLK02 MagicMotorsport - FLS0.5S -...

The FLS0.6M software package contains all the protocols for work in OBD and Bench on ECUs that mount Renesas SH7xxxx microprocessors. This family of microprocessors is generally supported by DENSO and Continental. This MASTER SW package also includes protocols for work on Kubota tractors via OBD and Bench as well. Thanks to the functions of...

The FLS0.6S software package contains all the protocols for work in OBD and Bench on ECUs that mount Renesas SH7xxxx microprocessors. This family of microprocessors is generally supported by DENSO and Continental. This MASTER SW package also includes protocols for work on Kubota tractors via OBD and Bench as well. Thanks to the functions of...

This FLEX SW package allows work in Bootloader / Bench mode on all control units that mount C165/166/167 Siemens microprocessors. This family of microprocessors is generally supported by older generation ECUs like ME7 and EDC15.

This FLEX SW package allows work in Bootloader / Bench mode on all control units that mount C165/166/167 Siemens microprocessors. This family of microprocessors is generally supported by older generation ECUs like ME7 and EDC15.

This FLEX SW package allows work in Bootloader / Bench mode on control units that mount ST10F2xx microprocessors. This family of microprocessors is generally supported by Marelli in older generation models, such as IAW, and is often equipped with an internal Flash.

This FLEX SW package allows work in Bootloader / Bench mode on control units that mount ST10F2xx microprocessors. This family of microprocessors is generally supported by Marelli in older generation models, such as IAW, and is often equipped with an internal Flash.

This software package includes protocols for work in JTAG AUD on engine control units that mount NEC76F00xx microprocessors. This family of microprocessors can be found in Toyota Denso 275xxx or 175xxx engine control units. This SW package makes it possible to communicate with the supported units through the JTAG port so in this case, it...

This software package includes protocols for work in JTAG AUD on engine control units that mount NEC76F00xx microprocessors. This family of microprocessors can be found in Toyota Denso 275xxx or 175xxx engine control units. This SW package makes it possible to communicate with the supported units through the JTAG port so in this case, it...

FLEX şu anda 22.000’den fazla aracı desteklemektedir. FLEX’in Slave sürümündeki yazılım işlevlerinin Tam paketi şunları içerir: ECU OBD, TCU OBD/Bench, BDM MPC5xx, Bench BOSCH MEDC17 + Bootloader Tricore, BL Nexus MPC5xxx, Renesas SH705x, BL Siemens C165/166/167, BL ST10, JTAG NEC 76F00xx ve Infineon TC17xxSürüm: MagicMotorsport Magic FLK02 +Master Sürümü için Aktivasyon MASTER ve SLAVE cihaz...

Complete Bench - Boot MEDC17 software package for programming BOSCH MEDC17 ECUs directly from the engine control unit connector.SOFTWARE FLEX INFINEON Bench/Boot TC17XX – MASTERWith the Bench / Boot MEDC17 Software package, you can now program a great deal of BOSCH MEDC17 controllers directly from the ECU connector without opening the unit. You will never...

Complete Bench/Boot MEDC17 software package for programming BOSCH MEDC17 ECUs directly from the engine control unit connector.SOFTWARE FLEX INFINEON TC17XX  Bench/Boot – SLAVEWith the Bench/Boot MEDC17 Software package, you can now program a great deal of BOSCH MEDC17 controllers directly from the ECU connector without opening the unit. You will never damage a BOSCH MEDC17...

MASTERThe FLEX Master tool has no limitation of file formats. The Master user works with plaintext files and .bin formats that are both editable with any type of software. Furthermore, the Master hasthe possibility to use the file modification services offered by MAGICMOTORSPORT and have access to 300 free Green coins per month as well...

The FLS0.3M software package allows the MASTER user to work on BDM and Bench protocols. This programming mode is used for communication with ECUs that mount the Motorola MPC5xx family of microprocessors. This type of microprocessor can generally be found on older generation vehicles fitted with EDC16 or MED9 ECUs. MAGICMOTORSPORT recommends that this SW...

1 yıllık ücretsiz yazılım güncellemesi.  Abonelik 959USD Master sürümü için yıllık. Paket, FLK02 FLEX Full HW Kit donanımını + Full Flex yazılım paketi Master sürümünü. içerir. Ürün Tanıtımı:Flex, mekatronik atölyeleri için yenilikçi bir programlayıcıdır ve tuning ile araç onarımı sektöründeki en son gelişmeleri destekler. Artık tamamen özelleştirilebilir. Yazılımınızı seçin, şirket logonuzu yükleyin ve kendi chiptuning cihazınızı oluşturun....