Overview
The C4-11 Adapter is specifically designed for Adding Keys and Data Read/Write operations on keys equipped with NXP 29XX series chips. It supports NXP 29XX Series Chip Data Read/Write, VW MQB 5C/5D Immobilizer Systems Key Programming (Add Keys) and BMW BDC03 & U-Chassis Immobilizer Systems Key Programming (Add Keys); When used with the NCF 29XX Solder-Free Adapter Board Kit, it enables fast, solder-free chip data reading and writing. Featuring dedicated adapter boards for specific applications, it ensures easy operation, stable and reliable performance, while ereducing the risk of damage caused by soldering directly to the key PCB—making key programming safer and more efficient.
Use with OBDSTAR Classic G3 X300 Pro4 and X300 MINI VW
Take proper electrostatic discharge (ESD) precautions before operation.
All locking mechanisms are secured before shipment. Before use, loosen the screw by half a turn to allow the locking mechanism to rotate smoothly.
If the key PCB does not fit into the slot, first check whether the PCB model matches the reference image. If the model is correct, rough edges caused by factory cutting may prevent proper installation. Use a file to smooth the edges until the PCB fits into the slot.
Adhesive on some PCB contact points may cause poor electrical contact. Refer to the wiring point diagram and carefully remove any adhesive from the contact points before installation.
Inconsistent PCB cutting may cause contact point misalignment and poor electrical contact. Carefully file and adjust the PCB edges as needed until the contact points are properly aligned and data can be read successfully.
After installation, visually check that all probes are properly aligned with their corresponding contact points. Once alignment is confirmed, proceed with data reading.
Package List:
1pc x C4-11 Adapter
1pc x W017