المنتجات

Flex Heavy-Duty (FLS0.15M) هو الحل المثالي لأداء عمليات القراءة والكتابة باستخدام Flex على جميع الفئات الرئيسية من المركبات الثقيلة. بفضل هذه الحزمة، يمكنك العمل بسرعة واحترافية على الشاحنات، والمركبات الصناعية، والآلات الزراعية، ومعدات البناء، والحافلات. جميع أوضاع الاتصال المدعومة متاحة في ترخيص البرنامج هذا: OBD، OBD Full، Bench، وBoot. يمكنك العمل على جميع وحدات التحكم...

Check Flex Vehicle List All the OBD and Bench protocols for ECU have been grouped in this SW package.Multi-language: English, Chinese, Italian, German, Russian, Polish, Korean, Spanish, Portuguese, Dutch, French, Greek, Romanian, Turkish, Serbian Please be advised that this is an online activation, no need for physical shipping.FLS0.1M license must be bought together with FLEX...

All the OBD and Bench protocols for ECU have been grouped in this SW package. OBD/Bench ECUs (cars, bikes, vans) MASTEROn activation of this SW package for FLEX, the user may work on all supported protocols for ECUs in cars, motorcycles and vans in OBD and Bench mode. Thanks to the state-of-the-art FLEX HW, programming...

Note: Full package of software functions for FLEX in Master version. Flex hardware is not included.FLEX currently supports more than 22,000 vehicles. The full package of software functions for FLEX in the Master version includes: ECU OBD, TCU OBD/Bench, BDM MPC5xx, Bench BOSCH MEDC17 + Bootloader Tricore, BL Nexus MPC5xxx, Renesas SH705x, BL Siemens C165/166/167,...

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD, Bench and boot mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content.

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD and Bench mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content.

The FLS0.3S software package allows the SLAVE user to work on BDM and Bench protocols. This programming mode is used for communication with ECUs that mount the Motorola MPC5xx family of microprocessors. This type of microprocessor can generally be found on older generation vehicles fitted with EDC16 or MED9 ECUs. MAGICMOTORSPORT recommends that this SW...

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD and Bench mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content. Software  DESC Master / Slave FLS0.1M Software Flex ECU (cars, vans, bikes) OBD...

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD and Bench mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content.

Product DescriptionFLEX currently supports more than 22,000 vehicles. The Full package of software functions for FLEX in Slave version includes: ECU OBD, TCU OBD/Bench, BDM MPC5xx, Bench BOSCH MEDC17 + Bootloader Tricore, BL Nexus MPC5xxx, Renesas SH705x, BL Siemens C165/166/167, BL ST10, JTAG NEC 76F00xx & Infineon TC17xx Made specifically for the FLEX FLK02 MagicMotorsport -...

The FLS0.6M software package contains all the protocols for work in OBD and Bench on ECUs that mount Renesas SH7xxxx microprocessors. This family of microprocessors is generally supported by DENSO and Continental. This MASTER SW package also includes protocols for work on Kubota tractors via OBD and Bench as well. Thanks to the functions of...

The FLS0.6S software package contains all the protocols for work in OBD and Bench on ECUs that mount Renesas SH7xxxx microprocessors. This family of microprocessors is generally supported by DENSO and Continental. This MASTER SW package also includes protocols for work on Kubota tractors via OBD and Bench as well. Thanks to the functions of...

This FLEX SW package allows work in Bootloader / Bench mode on all control units that mount C165/166/167 Siemens microprocessors. This family of microprocessors is generally supported by older generation ECUs like ME7 and EDC15.

This FLEX SW package allows work in Bootloader / Bench mode on all control units that mount C165/166/167 Siemens microprocessors. This family of microprocessors is generally supported by older generation ECUs like ME7 and EDC15.

This FLEX SW package allows work in Bootloader / Bench mode on control units that mount ST10F2xx microprocessors. This family of microprocessors is generally supported by Marelli in older generation models, such as IAW, and is often equipped with an internal Flash.

This FLEX SW package allows work in Bootloader / Bench mode on control units that mount ST10F2xx microprocessors. This family of microprocessors is generally supported by Marelli in older generation models, such as IAW, and is often equipped with an internal Flash.

This software package includes protocols for work in JTAG AUD on engine control units that mount NEC76F00xx microprocessors. This family of microprocessors can be found in Toyota Denso 275xxx or 175xxx engine control units. This SW package makes it possible to communicate with the supported units through the JTAG port so in this case, it...

This software package includes protocols for work in JTAG AUD on engine control units that mount NEC76F00xx microprocessors. This family of microprocessors can be found in Toyota Denso 275xxx or 175xxx engine control units. This SW package makes it possible to communicate with the supported units through the JTAG port so in this case, it...

ماجيك موتورسبورت - FLS0.5S - حزمة البرامج الكاملة فليكس - نسخة العبد حزمة كاملة من وظائف البرامج لفليكس في نسخة العبديدعم فليكس حالياً أكثر من 22,000 مركبة. تشمل الحزمة الكاملة من وظائف البرامج لفليكس في نسخة العبد: ECU OBD، TCU OBD/Bench، BDM MPC5xx، Bench BOSCH MEDC17 + Bootloader Tricore، BL Nexus MPC5xxx، Renesas SH705x، BL Siemens...

Complete Bench - Boot MEDC17 software package for programming BOSCH MEDC17 ECUs directly from the engine control unit connector.SOFTWARE FLEX INFINEON Bench/Boot TC17XX – MASTERWith the Bench / Boot MEDC17 Software package, you can now program a great deal of BOSCH MEDC17 controllers directly from the ECU connector without opening the unit. You will never...

Complete Bench/Boot MEDC17 software package for programming BOSCH MEDC17 ECUs directly from the engine control unit connector.SOFTWARE FLEX INFINEON TC17XX  Bench/Boot – SLAVEWith the Bench/Boot MEDC17 Software package, you can now program a great deal of BOSCH MEDC17 controllers directly from the ECU connector without opening the unit. You will never damage a BOSCH MEDC17...

MASTERThe FLEX Master tool has no limitation of file formats. The Master user works with plaintext files and .bin formats that are both editable with any type of software. Furthermore, the Master hasthe possibility to use the file modification services offered by MAGICMOTORSPORT and have access to 300 free Green coins per month as well...

The FLS0.3M software package allows the MASTER user to work on BDM and Bench protocols. This programming mode is used for communication with ECUs that mount the Motorola MPC5xx family of microprocessors. This type of microprocessor can generally be found on older generation vehicles fitted with EDC16 or MED9 ECUs. MAGICMOTORSPORT recommends that this SW...

1 Year software free update.  Subscription 959USD per year for Master version. The package contains FLK02 FLEX Full HW Kit hardware + Full Flex software package Master. Product Introduction:Flex is an innovative programmer for mechatronic workshops, and it supports the latest developments in the tuning and vehicle repair industry. Now, it is fully customizable. Choose your software,...