Yanhua ACDP-2 BMW BDC2 BDC3 BCP Programming Package with Module 3, Module 38, BDC2 Platform, B48/B58 Board and BDC3/BCP Board

Yanhua ACDP2 BMW BDC2 AKL Package includes ACDP-2 Hardware, Module 3, Module 38, BDC2 Keys Learning Bench Platform, and B48/B58 Interface Board.

Supports BMW G Series BDC2 key addition and all keys lost programming.

Package Includes:

• Yanhua ACDP2 Hardware
• Module 3
• Yanhua ACDP-2 Module 38
• BMW BDC2 Keys Learning Bench Platform with AKL License A504
• B48/B58 Interface Board
• BMW BDC3/BCP Interface Board

ACDP2 Programmer with License A801

Supports in-circuit programming (ICP) and adapter board programming (OBP) for 93 / 24 / 25 / 35 / 95 series EEPROM chips. This license is a required base configuration for additional modules.

Features:

1. No need to remove the chip, solder, cut wires, or lift pins.

2. USB direct connection with plug-and-play operation. Supports WiFi connection for wireless use.

3. Intelligent pin detection ensures safe and reliable data reading and writing.

#03 ISN Module with License A50E, A50B, A50D

Supports reading and writing N20, N55, and N13 ISN codes via OBD. Reads and writes MSV80 and MSD85 ISN codes without opening the DME housing. Other DME ISN codes can be read and written by opening the DME housing.

Reads the required ISN code for BMW all keys lost programming.

Supported ISN Reading and Writing:

• N20 (MEVD1724, MEVD172P, MEVD1729)
• N13 (MEVD1725)
• N55 (MEVD172, MEVD1726, MEVD172G, MEVD172S, MEVD17)
• MSV80
• MSD81
• MSD85
• MSD85HY
• MSD87
• MSV90
• MEVD1728 (S63)
• MEV1722
• MED172
• MEVD1727
• DDE701
• DC17C50
• BMSX

Module 3 Features:

1. Read ISN codes for N20, N55, and N13 via OBD or without opening the DME housing.

2. Read ISN codes for MSV70, MSV80, and MSD80 without opening the DME housing.

3. Read ISN codes for other models, including B38, by opening the DME housing.

4. Read ISN codes for MSV90 and B48 via OBD (B48/B58 Interface Board required).

5. Read and write ISN codes on the bench. Supports full versions of N13, N20, N63, S63, N55, B38, and more (Bench Interface Board required).

6. ECU cloning function. Supports D-Flash and P-Flash reading and writing for BMW N13, N20, N63, S63, N55, and B38 (Bench Interface Board and authorization required).

#38 BMW BDC2 IMMO with License A503

Supports key addition for all BMW BDC2 versions, BDC2 refresh, and data copy replacement.

Module 38 Features:

Supports key addition for all versions of BMW BDC2.

Compatible with both original and aftermarket G-Series blank keys. No dedicated keys are required.

Fully automatic operation with no manual cable plugging or unplugging during the process, providing safe and stable performance.

No annual subscription or per-use fees. One-time purchase with no hidden charges.

Supported Models:
 

Yanhua BMW BDC2 Keys Learning Bench Platform for All Keys Lost, Compatible with Module 38

Platform Functions:

1. Includes BMW BDC2 all keys lost authorization (used together with Module 38).

2. Supports BDC2 key learning on the bench without reinstalling the BDC2 module in the vehicle.

3. Supports emergency key function testing to verify that the key can switch on the ignition and confirm successful key learning.

4. Supports connection to smart antennas and the remote control receiver for testing remote control and keyless entry functions.

5. Supports connection to the BDC2 instrument cluster and DME module.

Platform Features:

1. Compatible with any device that supports the BMW BDC2 module.

2. The interface board replaces manual wiring, providing a safer, more convenient, and more efficient operation.

Yanhua ACDP BMW B48/B58 Interface Board for B48/B58 ISN Reading and Clone via Bench Mode 

Features:

1. Support all F/G chassis versions and all B48/B58 DME which chipmodel is (SPC5777/TC298TP).
   2. No programming is required and the ISN is read in seconds.
   3: The special interface board connection method replaces the traditional plugging wire method, simple and efficient, safe andreliable.
   
   How to Enter the All Key Lost Menu In ACDP APP?
   
   BMW-> FEM/BDC-> IMMO/Mileage-> BDC2 ICP+ OBD (F/G Chassis)-> Add Key (All key lost)
   
   How to Do BMW BDC2 All Key Lost?
   
   Step 1: Backup coding data
   Use Yanhua ACDP Module 3 and B48 Interface Board to backup EEPROM data
   Step 2:  Backup FAFP data
   Step 3: Write IMMO data
   Step 4: Write coding data
   Step 5: Made dealer key
   After making the dealer key, turn on the ignition to do key match
   Step 6: Write DME ISN
   Verify the key can start the car normally, then go to next step
   Step 7: Reset EGS EWS(turn on ignition, but not start the car)
   After finishing these steps, start the engine - both the key and vehicle should now function properly

Package List:

1pc x Yanhua ACDP-2
1pc x  Module 38
1pc x  P CAN-II Cable Module3
1pc x YANHUA B48-Bench Interface Board-ACDP2
1pc x BMW BDC2 Keys Learning Bench Platform with AKL License A504
1pc x BMW BDC3 BDP Interface Board