super deal

The kit contains:FLK02.V02 Flex Chiptuning Tool KitFLS0.13M SW Flex Bikes OBD/Bench/Boot MasterFLX8.34 Magicmotorsport Rigid Cable CaseFLX2.68 Connection cable Flex port Euro5 6-Pin ConnectorFLX2.73 MSE6.0 Bosch ECU CableMMS03.003 OBD adapter Ducati EURO 4 4 pinsMMS03.004 OBD adapter KTM EURO4 6pinsMMS03.005 OBD adapter Honda EURO4 4pinsMMS03.006 OBD adapter Yamaha EURO4 4pinsMMS03.007 OBD adapter Suzuki EURO4 4pins

Main features: Full support for ECMs, TCMs, CPCs, and other units All connection modes are available Programming and repair Master version Flex Heavy-Duty (FLS0.15S) is the ideal solution for those who want to carry out read and write operations with the Flex programmer on all the main heavy-duty vehicles. Thanks to this package, you can...

Main features:     Full support for ECMs, TCMs, CPCs, and other units     All connection modes available     Programming and repair     Master version Flex Heavy-Duty (FLS0.15M) is the ideal solution for those who want to carry out read and write operations with the Flex programmer on all the main heavy-duty...

On activation of this SW package for FLEX, the user may work on all supported protocols for ECUs and any other modules in motorcycles.Thanks to the state-of-the-art FLEX HW, programming in OBD and Bench mode guarantees reading and writing of the contents of the control units with no need to open them.This software package include...

On activation of this SW package for FLEX (FLK02), the user may work on all supported protocols for ECUs and any other modules in motorcycles.Thanks to the state-of-the-art FLEX HW, programming in OBD and Bench mode guarantees reading and writing of the contents of the control units with no need to open them.This software package...

Complete Bench/Boot MEDC17 software package for programming BOSCH MEDC17 ECUs directly from the engine control unit connector.SOFTWARE FLEX INFINEON TC17XX  Bench/Boot – SLAVEWith the Bench/Boot MEDC17 Software package, you can now program a great deal of BOSCH MEDC17 controllers directly from the ECU connector without opening the unit. You will never damage a BOSCH MEDC17...

Complete Bench - Boot MEDC17 software package for programming BOSCH MEDC17 ECUs directly from the engine control unit connector.SOFTWARE FLEX INFINEON Bench/Boot TC17XX – MASTERWith the Bench / Boot MEDC17 Software package, you can now program a great deal of BOSCH MEDC17 controllers directly from the ECU connector without opening the unit. You will never...

This software package includes protocols for work in JTAG AUD on engine control units that mount NEC76F00xx microprocessors. This family of microprocessors can be found in Toyota Denso 275xxx or 175xxx engine control units. This SW package makes it possible to communicate with the supported units through the JTAG port so in this case, it...

This FLEX SW package allows work in Bootloader / Bench mode on control units that mount ST10F2xx microprocessors. This family of microprocessors is generally supported by Marelli in older generation models, such as IAW, and is often equipped with an internal Flash.

The FLS0.3S software package allows the SLAVE user to work on BDM and Bench protocols. This programming mode is used for communication with ECUs that mount the Motorola MPC5xx family of microprocessors. This type of microprocessor can generally be found on older generation vehicles fitted with EDC16 or MED9 ECUs. MAGICMOTORSPORT recommends that this SW...

LAUNCH X431 EV Diagnostic Upgrade Kit + Activation Card Compatible with X431 PAD V & PAD VII, PRO3 V+ 5.0 \ PRO3(PRO3S+ V5.0)\PRO3 ACE\ PRO3 APEXAfter the App is upgraded to the latest version, LAUNCH’s 10-inch-screen decoders are now supported, for example: X-431 PRO3 V+ 5.0 \X-431 PRO3 (PRO3S+ V5.0)\ APEX. User has already purchased...

Upgraded from LAUNCH X431 Pro MINI, X431 V PRO, PRO3S+ and X431 V+ , as a new member coming into X431 group, LAUNCH scan tool X431 PRO3S+ Elite has inherited all the strengths of its predecessors and greatly developed its advantages like J2534 Programming, 50+ Reset Functions, Bi-directional Control, Online Functions, ECU Coding, All System...

Product Features:Full system diagnostic lifetime free28 maintenance functions lifetime freeThinkTool MINI Support 93 major car brands and 28+ languages6 inch Touch Screen + 2G/32G MemoryWHY CHOOSE THINKTOOL MINI? OE-level Full system diagnostic: read fault codes for all system, such as ECM, TCM, ABS, SRS, BCM, IMM, BMS, TPMS, SAS, Fuel System, Light System, Wiper System,...

Type: 4A-B6, 4A-AA, 4A-BA Frequency: 433.58/434.42   312.09/314.35 Compatible Devices: K518/K518PRO/KW100 Compatible Models:  for Avalon(2025-2026)                                 for Yaris(2025-2026)                                 for Avalon HV(2025-2026) Package includes:1pc x LONSDOR LT32 Series for TOYOTA/LEXUS...

Product Description :1. This is Launch renewal card 2 years update service for Launch V/ V+/ X431 Pro Mini/ ProS Mini/ DIAGUN IV/ 5C/ PRO DYNO/ PRO3S/ PRO52. You can buy it to extend 2 years subscription. Launch Renewal Card 2 Years Update Service for Launch V/ V+/ X431 Pro Mini/ ProS Mini/ DIAGUN IV/...

Product Functions: Designed for 2018-2022 NIO EC6, ES6, and ES8 models, this system features OEM plug-and-play installation requiring no wire cutting or harness modification.By directly connecting to the vehicle's CAN bus via the NlO 16PiN GateWay dedicated wiring harness (C1031), it enables PiN Code-free key programming and works seamiessly with third-party devices. Package includes: 1pc...

Original Alientech KESS V3 KESS3 Slave-Version ECU- und TCU-Programmierwerkzeug mit Car OBD-Bench-Boot LCV-ProtokollenDer KESS3 ist das neueste ECU-Tuning-Werkzeug von Alientech und ersetzt sowohl den KESSv2 als auch den K-TAG. KESS3 bietet Ihnen mehr Kontrolle als seine Vorgänger KESSv2 und K-TAG und kann ohne zusätzliche Hardwarekosten aktualisiert werden. Dieses neue Werkzeug ermöglicht es Nutzern, schneller und...

The Creader Professional 719I is a smart, network-enabled diagnostic tool based on the Android platform. It features full-system code reading, code clearing, version information, data stream reading, and actuation tests—perfectly suited for the DIY passenger car market. In addition, it comes with 28 special functions, full OBD functionality, and lifetime free upgrades. It features full-system...

Produktvorstellung: TOPDON Rlink X7 für Volkswagen unterstützt die OEM ODI-S V23.05 Software und ODI-S Engineer v17.01. Die OEM-Diagnoseschnittstelle des RLink X7 6154 unterstützt DoIP für Volkswagen, Audi, Skoda, Seat, Bentley und Lamborghini. Sie ist kompatibel mit der OEM-Software ODI-S. Highlights des RLink X7 für Volkswagen:  1. Vollständiger Ersatz für OEM-Werkzeuge wie VAS 5054 und VAS...

Die intelligente Fahrzeugdiagnoseschnittstelle RLink X7 für Nissan stellt die nächste Generation der Diagnosetechnologie dar. Das Produkt verwendet einen neuen Hochgeschwindigkeitsprozessor, unterstützt vollständig Multi-Channel CAN-FD/DoIP und traditionelle Diagnoseprotokolle und ist mit mehr originaler Diagnosesoftware kompatibel.Das RLink J2534-Gerät unterstützt alle J2534-Protokolle vollständig und gewährleistet die Kompatibilität mit OEM-Neuprogrammierungen und Diagnosefunktionen. Es integriert fortschrittliche D-PDU-, CAN-FD- und DoIP-Protokolle...

TOPDON TopScan Pro Mittelklasse-Diagnosegerät mit 13 Reset-Funktionen  Einführung: Der TopScan Pro ist ein taschengroßes Werkzeug, das ein Telefon in ein Diagnosegerät verwandelt und seine Nutzer über einfache Scans hinaus begleitet. Verbinden Sie den TopScan Pro mit dem OBD2-Anschluss und beginnen Sie die Diagnose über die App des Geräts. Der TopScan Pro glänzt bei den Grundlagen....

Product Introduction: LAUNCH X431 PAD5 ELITE V2 is a new-generation PAD series product built on the Android 15.0 operating system. It features an octa-core high-performance processor, 8GB RAM and 128GB ROM for ample storage, and a high-capacity battery, delivering faster, more stable, and longer-lasting performance. It covers over 98% of vehicles on the market and...

Heavy-duty trucks are not currently supported.  

Xhorse VVDI 754J Smart Key PCB 315MHZ/433MHZ/868MHZ, please note it includes key pcb and key shell now. For Audi A6L Q5 A4L A8L New Version, support 315/ 433/ 868MHZ Switch frequency by software No welding required Support switch frequency using VVDI 2 / KEYTOOL / KEYTOOL MAX / MINI KEYTOOL / KEYTOOL PLUS  Note: Xhorse...