Logiciel/Jeton/Licence

Highlights:1. Can be applied to LAUNCH X431 PAD series (PAD VII, PAD V, X431 V 8inch, X431 V+, Pad II, X431 Throttle etc) 2. Tesla software can be purchased here or directly from X431“Mall”by card payment.3. Software service, no need shipping. Notice:1. Provide your X431 device serial number to activate license after payment.2. With one year expiration. It is...

VXDIAG Multi Diagnostic Tool Software license for PW3This is Authorization license for PW3 for vxdiag multi machine. Only available for device with S/N V71XN***** or above VCX DoIP device.No need shipping. Please send us serial number after you make payment, we will add license for you when you send us serial number.Note: There is no software included....

VXDIAG JLR DOIP Pathfinder Software License This JLR DOIP License is available to add for all vxdiag multi machines with SN V71XN******. or above SN V71XN******.Note: The DOIP Software is installed on Hard Disk, if customers do not have software, when purchase the license, need to buy software HDD together.If customers have JLR Software at hand, only need...

Note: No need shipping. Please provide us serial number of CGDI Prog BMW for activation. How to use CGDI BMW Data Modification function?1. Read EEPROM data with CGDI BMW or CGPro2.Modify data. Select engine, load data, manually enter the VIN and ISN, then save new data3.Write new data to engine with CG100 or CGPro

Notice:1. Please send us the serial number of the Lonsdor K518 PRO FCV  with picture to our Email 2. No Need Shipping. No Refund service.3. This is Only for add license authorization. Without Hardware Warranty. Please Notice.4. It Will Take 1-2 Working Days To Be Finished. We will inform you. Lonsdor K518 PRO FCV Version (Free...

Notice: 1. Please send us the serial number of the Lonsdor K518 PRO FCV  with picture to our Email 2. No Need Shipping. No Refund service.3. This is Only for add license authorization. Without Hardware Warranty. Please Notice.4. It Will Take 1-2 Working Days To Be Finished. We will inform you. Lonsdor K518 PRO FCV Version...

Key features Access to supported Boot Glitch protocols Advanced MCU access procedures ECU unlocking procedures Compatibility with Korhex protocols The license enables access to dedicated protocols directly through Flex, with connection instructions and guided procedures according to the selected ECU. FLS0.20 also enables the software features required to use Korhex on compatible applications. When a Korhex protocol is available, Flex guides the technician through every step of...

Main features: Full support for ECMs, TCMs, CPCs, and other units All connection modes are available Programming and repair Master version Flex Heavy-Duty (FLS0.15S) is the ideal solution for those who want to carry out read and write operations with the Flex programmer on all the main heavy-duty vehicles. Thanks to this package, you can...

Main features:     Full support for ECMs, TCMs, CPCs, and other units     All connection modes available     Programming and repair     Master version Flex Heavy-Duty (FLS0.15M) is the ideal solution for those who want to carry out read and write operations with the Flex programmer on all the main heavy-duty...

On activation of this SW package for FLEX, the user may work on all supported protocols for ECUs and any other modules in motorcycles.Thanks to the state-of-the-art FLEX HW, programming in OBD and Bench mode guarantees reading and writing of the contents of the control units with no need to open them.This software package include...

On activation of this SW package for FLEX (FLK02), the user may work on all supported protocols for ECUs and any other modules in motorcycles.Thanks to the state-of-the-art FLEX HW, programming in OBD and Bench mode guarantees reading and writing of the contents of the control units with no need to open them.This software package...

Complete Bench/Boot MEDC17 software package for programming BOSCH MEDC17 ECUs directly from the engine control unit connector.SOFTWARE FLEX INFINEON TC17XX  Bench/Boot – SLAVEWith the Bench/Boot MEDC17 Software package, you can now program a great deal of BOSCH MEDC17 controllers directly from the ECU connector without opening the unit. You will never damage a BOSCH MEDC17...

Complete Bench - Boot MEDC17 software package for programming BOSCH MEDC17 ECUs directly from the engine control unit connector.SOFTWARE FLEX INFINEON Bench/Boot TC17XX – MASTERWith the Bench / Boot MEDC17 Software package, you can now program a great deal of BOSCH MEDC17 controllers directly from the ECU connector without opening the unit. You will never...

This software package includes protocols for work in JTAG AUD on engine control units that mount NEC76F00xx microprocessors. This family of microprocessors can be found in Toyota Denso 275xxx or 175xxx engine control units. This SW package makes it possible to communicate with the supported units through the JTAG port so in this case, it...

This software package includes protocols for work in JTAG AUD on engine control units that mount NEC76F00xx microprocessors. This family of microprocessors can be found in Toyota Denso 275xxx or 175xxx engine control units. This SW package makes it possible to communicate with the supported units through the JTAG port so in this case, it...

This FLEX SW package allows work in Bootloader / Bench mode on control units that mount ST10F2xx microprocessors. This family of microprocessors is generally supported by Marelli in older generation models, such as IAW, and is often equipped with an internal Flash.

This FLEX SW package allows work in Bootloader / Bench mode on control units that mount ST10F2xx microprocessors. This family of microprocessors is generally supported by Marelli in older generation models, such as IAW, and is often equipped with an internal Flash.

This FLEX SW package allows work in Bootloader / Bench mode on all control units that mount C165/166/167 Siemens microprocessors. This family of microprocessors is generally supported by older generation ECUs like ME7 and EDC15.

This FLEX SW package allows work in Bootloader / Bench mode on all control units that mount C165/166/167 Siemens microprocessors. This family of microprocessors is generally supported by older generation ECUs like ME7 and EDC15.

The FLS0.6S software package contains all the protocols for work in OBD and Bench on ECUs that mount Renesas SH7xxxx microprocessors. This family of microprocessors is generally supported by DENSO and Continental. This MASTER SW package also includes protocols for work on Kubota tractors via OBD and Bench as well. Thanks to the functions of...

The FLS0.6M software package contains all the protocols for work in OBD and Bench on ECUs that mount Renesas SH7xxxx microprocessors. This family of microprocessors is generally supported by DENSO and Continental. This MASTER SW package also includes protocols for work on Kubota tractors via OBD and Bench as well. Thanks to the functions of...

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD and Bench mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content.

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD and Bench mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content. Software  DESC Master / Slave FLS0.1M Software Flex ECU (cars, vans, bikes) OBD...

The FLS0.3S software package allows the SLAVE user to work on BDM and Bench protocols. This programming mode is used for communication with ECUs that mount the Motorola MPC5xx family of microprocessors. This type of microprocessor can generally be found on older generation vehicles fitted with EDC16 or MED9 ECUs. MAGICMOTORSPORT recommends that this SW...