Xhorse Multi-Prog ECU and TCU Programmer with GODIAG GT100 and ECU GPT Boot AD Connector for ECU Reading and Writing

Xhorse Multi-Prog ECU and TCU Programmer with GODIAG GT100 and ECU GPT Boot AD Connector for ECU Reading and Writing

Highlights:

1. Bundled package includes:
   Xhorse Multi-Prog professional ECU and TCU programmer
   GODIAG GT100 OBDII breakout box ECU connector
   GODIAG ECU GPT Boot AD ECU connector
2. Xhorse Multi-Prog ECU programmer is designed to access and modify key data stored in vehicle ECU and TCU systems, including engine maps, transmission parameters, and immobilizer data. It provides advanced control for reading, writing, and customization.
3. GODIAG GT100 supports communication detection, ECU maintenance, diagnostics, programming, and coding.
4. GODIAG ECU GPT adapter supports reading and writing ECU data without disassembly using OBD2 bench or GPT bench methods, as well as boot mode after ECU disassembly. It includes a short-circuit protection boot resistance board cable to help protect the ECU. It can be used with J2534 devices and PCMFlash software.

Optional accessories:
GODIAG GT107 DSG Plus gearbox data adapter with voltage and current display
GODIAG GT107 DSG gearbox adapter with GT105 II
GODIAG G-V ECU cable for reading and writing VAG gearbox ECU and engine ECU data

Multi-Prog programmer features:

1. Replaces VVDI Prog with additional batch programming function for chips, supporting factory mode, offline programming, and file-based programming.
2. Includes free MQB48 license and BMW bench ISN reading function. It can be bound with Xhorse VVDI2 or Key Tool Plus PAD account to enable MQB48 functionality.
3. Supports ECU reading, writing, and cloning.
4. Supports TCU reading, writing, and cloning.
5. Supports EEPROM, ECU, and MCU data operations.
6. Supports Bosch ECU ISN reading and writing with dedicated adapter.
7. Supports checksum correction for selected EDC16 and EDC17 ECUs.
8. Provides free BMW ISN reading function and continuous updates for NEC, MPC, Infineon and other chips.
9. Built-in MQB48 license. After binding Multi-Prog with VVDI2 full version or Key Tool Plus PAD under the same Xhorse account, MQB48 NEC35XX function can be used.
10. Supports free software and firmware updates.
11. Supports VAG MQB RH850 dashboard processor with additional adapter required.
12. Compatible with Xhorse MQB solder-free adapters.
13. Works with Xhorse Multi-Prog 4-in-1 adapters for extended chip support.
14. Supports multiple chip types including MC9S08, MC68HC12, MC9S12, V850, H8X, R8C, PCF79XX and most EEPROM chips.
15. Supports chip data verification and blank check function.
16. Supports file comparison function.
17. Supports PIN code calculation from dump for multiple vehicle models.
18. Supports BMW N20 and N55 ECU read and write with ISN display.
19. Stable support for MC9S12XE series chips including 5M48H, 1N35H, 2M53J, 3M25J.
20. Supports PCF79XX remote renewal for BMW E and F series (adapter optional).
21. Large database of connection diagrams included.
22. Reserved ports for future upgrades.
23. Supports repair of Porsche 12V lithium battery and BYD lithium battery (MC9S12XET256).
24. Supports EDC17 and MED17 checksum calculation.
25. Supports third-party HEX editing scripts.
26. Supports expert mode batch chip writing, improving efficiency compared to single-chip programming.

Highlights for GODIAG GT100:

GODIAG GT100 supports communication detection, ECU maintenance, diagnosis, programming, and coding, making work simpler and more efficient while saving time and cost.

• Helps activate dashboard or IMMO module for VW, Porsche, Mitsubishi, and Toyota vehicles. In all keys lost situations, the GT100 with OBDII breakout box can activate the dashboard or immobilizer module before using other tools such as Autel IM608 for key programming.
• Supports ECU connection and multiple vehicle ECU module communication. It allows connection of single or multiple ECU control modules at the same time, making it useful for programming and diagnostics.
• Banana plug extension connection extends the vehicle OBDII 16-pin interface, allowing users to check whether the OBDII connection is working properly and measure voltage waveform during testing.
• Converts OBD1 diagnostic interface to standard OBD2 interface based on the vehicle communication protocol using the adapter.
• Extension cable function provides additional length when the diagnostic port is in a tight space or when the original cable is not long enough during maintenance. The extension length is approximately 4.5 ft.
• Supports auxiliary power supply for vehicles during battery replacement to maintain continuous power supply through the GT100 OBDII breakout box.
• Ships from US, UK, and EU warehouses. Delivery in 3–5 days with tax included.
• One year warranty included.
• Works with BMW CAS4 and CAS4+ test platforms and supports Xhorse VVDI2, Lonsdor K518, CGDI, and Autel IM608 for offline key programming, all keys lost, and new key addition.
• Works with BMW FEM BDC test platforms for FEM BDC key programming.
• Compatible with multiple diagnostic tools including Xhorse VVDI2, Xhorse Multi-Prog, Autel scanners, Launch scanners, Vident scanners, CGDI devices, and others for testing and diagnostics.

GODIAG ECU GPT Boot AD ECU Connector supports ECU reading and writing without disassembly. It is compatible with J2534, Openport, PCMFlash, FoxFlash, and FC200.

The ECU GPT Boot AD programming adapter allows users to read and write ECU data using OBD2 bench or GPT bench methods without removing the ECU. It also supports boot mode operation when ECU disassembly is required. The adapter includes a short-circuit protection boot resistance board connection cable to help protect the ECU during operation. It can be used with J2534 devices and PCMFlash software.

GODIAG ECU GPT Boot Adapter functions:

Supports diagnostic function with standard OBD2 protocol devices.
Supports ECU reading and writing data and is compatible with J2534 devices.
Scanmatik 2 PRO with PCMFlash supports GPT1 and GPT2 signal generation required for Module 71 operation.
Other devices including Scanmatik OpenPort 2.0, Mongoose JLR, MongoosePro JLR, Teradyne GNA600 (VCM 1), and Mazda VCM 2 support OBD2 or boot mode 53 for ECU reading and writing.

Package includes:
1 x Multi-PROG
1 x USB cable
1 x power adapter 15V 4A
1 x 220V power cord
1 x VH13 interface adapter board
1 x VH20 interface adapter board
1 x VH23 interface adapter board
1 x MCU adapter Multi-PROG solder cable
1 x MCU DB15 adapter cable
1 x ECU adapter Multi-PROG solder cable
1 x ECU DB15 adapter cable
1 x Multi-PROG OBD cable
1 x USB WiFi network card
1 x product manual
1 x certificate of conformity
43 x ECU cable plugs
1 x GT100 host
1 x OBD 2-in-1 extension cable
1 x colored jumper cable
1 x 12V power supply
1 x 120 ohm resistor
6 x banana plugs
24 x wire accessories, Dupont 2.54mm connector female pins
1 x GODIAG ECU GPT Boot AD programming adapter
1 x OBD2 to DB25 cable
8 x soft silicone wires