매직 모터스포츠

Key features Access to supported Boot Glitch protocols Advanced MCU access procedures ECU unlocking procedures Compatibility with Korhex protocols The license enables access to dedicated protocols directly through Flex, with connection instructions and guided procedures according to the selected ECU. FLS0.20 also enables the software features required to use Korhex on compatible applications. When a Korhex protocol is available, Flex guides the technician through every step of...

Compact, flexible, lightweight, universal and portable. MAGBench Mini is the complete solution for programming any kind of memory. Designed with patented top panel and two articulated arms. Technical information: - patented TOP panel in polycarbonate- two articulated arms- rotary system in brass and alloy- Boot, BDM and Jtag programming mode best choise The kit contains:...

The kit contains:FLK02.V02 Flex Chiptuning Tool KitFLS0.13M SW Flex Bikes OBD/Bench/Boot MasterFLX8.34 Magicmotorsport Rigid Cable CaseFLX2.68 Connection cable Flex port Euro5 6-Pin ConnectorFLX2.73 MSE6.0 Bosch ECU CableMMS03.003 OBD adapter Ducati EURO 4 4 pinsMMS03.004 OBD adapter KTM EURO4 6pinsMMS03.005 OBD adapter Honda EURO4 4pinsMMS03.006 OBD adapter Yamaha EURO4 4pinsMMS03.007 OBD adapter Suzuki EURO4 4pins

Main features: Full support for ECMs, TCMs, CPCs, and other units All connection modes are available Programming and repair Master version Flex Heavy-Duty (FLS0.15S) is the ideal solution for those who want to carry out read and write operations with the Flex programmer on all the main heavy-duty vehicles. Thanks to this package, you can...

Main features:     Full support for ECMs, TCMs, CPCs, and other units     All connection modes available     Programming and repair     Master version Flex Heavy-Duty (FLS0.15M) is the ideal solution for those who want to carry out read and write operations with the Flex programmer on all the main heavy-duty...

On activation of this SW package for FLEX, the user may work on all supported protocols for ECUs and any other modules in motorcycles.Thanks to the state-of-the-art FLEX HW, programming in OBD and Bench mode guarantees reading and writing of the contents of the control units with no need to open them.This software package include...

On activation of this SW package for FLEX (FLK02), the user may work on all supported protocols for ECUs and any other modules in motorcycles.Thanks to the state-of-the-art FLEX HW, programming in OBD and Bench mode guarantees reading and writing of the contents of the control units with no need to open them.This software package...

Complete Bench/Boot MEDC17 software package for programming BOSCH MEDC17 ECUs directly from the engine control unit connector.SOFTWARE FLEX INFINEON TC17XX  Bench/Boot – SLAVEWith the Bench/Boot MEDC17 Software package, you can now program a great deal of BOSCH MEDC17 controllers directly from the ECU connector without opening the unit. You will never damage a BOSCH MEDC17...

Complete Bench - Boot MEDC17 software package for programming BOSCH MEDC17 ECUs directly from the engine control unit connector.SOFTWARE FLEX INFINEON Bench/Boot TC17XX – MASTERWith the Bench / Boot MEDC17 Software package, you can now program a great deal of BOSCH MEDC17 controllers directly from the ECU connector without opening the unit. You will never...

This software package includes protocols for work in JTAG AUD on engine control units that mount NEC76F00xx microprocessors. This family of microprocessors can be found in Toyota Denso 275xxx or 175xxx engine control units. This SW package makes it possible to communicate with the supported units through the JTAG port so in this case, it...

This software package includes protocols for work in JTAG AUD on engine control units that mount NEC76F00xx microprocessors. This family of microprocessors can be found in Toyota Denso 275xxx or 175xxx engine control units. This SW package makes it possible to communicate with the supported units through the JTAG port so in this case, it...

This FLEX SW package allows work in Bootloader / Bench mode on control units that mount ST10F2xx microprocessors. This family of microprocessors is generally supported by Marelli in older generation models, such as IAW, and is often equipped with an internal Flash.

This FLEX SW package allows work in Bootloader / Bench mode on control units that mount ST10F2xx microprocessors. This family of microprocessors is generally supported by Marelli in older generation models, such as IAW, and is often equipped with an internal Flash.

This FLEX SW package allows work in Bootloader / Bench mode on all control units that mount C165/166/167 Siemens microprocessors. This family of microprocessors is generally supported by older generation ECUs like ME7 and EDC15.

This FLEX SW package allows work in Bootloader / Bench mode on all control units that mount C165/166/167 Siemens microprocessors. This family of microprocessors is generally supported by older generation ECUs like ME7 and EDC15.

The FLS0.6S software package contains all the protocols for work in OBD and Bench on ECUs that mount Renesas SH7xxxx microprocessors. This family of microprocessors is generally supported by DENSO and Continental. This MASTER SW package also includes protocols for work on Kubota tractors via OBD and Bench as well. Thanks to the functions of...

The FLS0.6M software package contains all the protocols for work in OBD and Bench on ECUs that mount Renesas SH7xxxx microprocessors. This family of microprocessors is generally supported by DENSO and Continental. This MASTER SW package also includes protocols for work on Kubota tractors via OBD and Bench as well. Thanks to the functions of...

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD and Bench mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content.

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD and Bench mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content.

The FLS0.3S software package allows the SLAVE user to work on BDM and Bench protocols. This programming mode is used for communication with ECUs that mount the Motorola MPC5xx family of microprocessors. This type of microprocessor can generally be found on older generation vehicles fitted with EDC16 or MED9 ECUs. MAGICMOTORSPORT recommends that this SW...

The FLS0.3M software package allows the MASTER user to work on BDM and Bench protocols. This programming mode is used for communication with ECUs that mount the Motorola MPC5xx family of microprocessors. This type of microprocessor can generally be found on older generation vehicles fitted with EDC16 or MED9 ECUs. MAGICMOTORSPORT recommends that this SW...

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD and Bench mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content.

With this FLEX SW package, the user may work on all supported protocols for TCUs in OBD, Bench and boot mode. In Bench mode, as in the case of ECUs, FLEX is able to give a complete reading and writing of the content.

MASTERThe FLEX Master tool has no limitation of file formats. The Master user works with plaintext files and .bin formats that are both editable with any type of software. Furthermore, the Master hasthe possibility to use the file modification services offered by MAGICMOTORSPORT and have access to 300 free Green coins per month as well...