super deal

On activation of this SW package for FLEX (FLK02), the user may work on all supported protocols for ECUs and any other modules in motorcycles.Thanks to the state-of-the-art FLEX HW, programming in OBD and Bench mode guarantees reading and writing of the contents of the control units with no need to open them.This software package...

Complete Bench/Boot MEDC17 software package for programming BOSCH MEDC17 ECUs directly from the engine control unit connector.SOFTWARE FLEX INFINEON TC17XX  Bench/Boot – SLAVEWith the Bench/Boot MEDC17 Software package, you can now program a great deal of BOSCH MEDC17 controllers directly from the ECU connector without opening the unit. You will never damage a BOSCH MEDC17...

Complete Bench - Boot MEDC17 software package for programming BOSCH MEDC17 ECUs directly from the engine control unit connector.SOFTWARE FLEX INFINEON Bench/Boot TC17XX – MASTERWith the Bench / Boot MEDC17 Software package, you can now program a great deal of BOSCH MEDC17 controllers directly from the ECU connector without opening the unit. You will never...

This software package includes protocols for work in JTAG AUD on engine control units that mount NEC76F00xx microprocessors. This family of microprocessors can be found in Toyota Denso 275xxx or 175xxx engine control units. This SW package makes it possible to communicate with the supported units through the JTAG port so in this case, it...

This FLEX SW package allows work in Bootloader / Bench mode on control units that mount ST10F2xx microprocessors. This family of microprocessors is generally supported by Marelli in older generation models, such as IAW, and is often equipped with an internal Flash.

The FLS0.3S software package allows the SLAVE user to work on BDM and Bench protocols. This programming mode is used for communication with ECUs that mount the Motorola MPC5xx family of microprocessors. This type of microprocessor can generally be found on older generation vehicles fitted with EDC16 or MED9 ECUs. MAGICMOTORSPORT recommends that this SW...

LAUNCH X431 EV Diagnostic Upgrade Kit + Activation Card Compatible with X431 PAD V & PAD VII, PRO3 V+ 5.0 \ PRO3(PRO3S+ V5.0)\PRO3 ACE\ PRO3 APEXAfter the App is upgraded to the latest version, LAUNCH’s 10-inch-screen decoders are now supported, for example: X-431 PRO3 V+ 5.0 \X-431 PRO3 (PRO3S+ V5.0)\ APEX. User has already purchased...

Upgraded from LAUNCH X431 Pro MINI, X431 V PRO, PRO3S+ and X431 V+ , as a new member coming into X431 group, LAUNCH scan tool X431 PRO3S+ Elite has inherited all the strengths of its predecessors and greatly developed its advantages like J2534 Programming, 50+ Reset Functions, Bi-directional Control, Online Functions, ECU Coding, All System...

Product Features:Full system diagnostic lifetime free28 maintenance functions lifetime freeThinkTool MINI Support 93 major car brands and 28+ languages6 inch Touch Screen + 2G/32G MemoryWHY CHOOSE THINKTOOL MINI? OE-level Full system diagnostic: read fault codes for all system, such as ECM, TCM, ABS, SRS, BCM, IMM, BMS, TPMS, SAS, Fuel System, Light System, Wiper System,...

유형: 4A-B6, 4A-AA, 4A-BA 주파수: 433.58/434.42   312.09/314.35 호환 장치: K518/K518PRO/KW100 호환 모델:  Avalon(2025-2026)용                                 Yaris(2025-2026)용                                 Avalon HV(2025-2026)용 패키지 구성:TOYOTA/LEXUS 4A-B6용 LONSDOR LT32 시리즈 LT32-02 PCB 키 보드 1개(보드만)

제품 설명:1. Launch V/ V+/ X431 Pro Mini/ ProS Mini/ DIAGUN IV/ 5C/ PRO DYNO/ PRO3S/ PRO5용 2년 업데이트 갱신 서비스입니다.2. 구매하시면 구독 기간을 2년 연장할 수 있습니다. Launch V/ V+/ X431 Pro Mini/ ProS Mini/ DIAGUN IV/ 5C/ PRO DYNO/ PRO3S/ PRO5용 2년 업데이트 갱신 서비스주의사항:1. 대상 제품: Launch V/ V+/ X431 Pro Mini/...

Product Functions: Designed for 2018-2022 NIO EC6, ES6, and ES8 models, this system features OEM plug-and-play installation requiring no wire cutting or harness modification.By directly connecting to the vehicle's CAN bus via the NlO 16PiN GateWay dedicated wiring harness (C1031), it enables PiN Code-free key programming and works seamiessly with third-party devices. Package includes: 1pc...

정품 Alientech KESS V3 KESS3 Slave Version ECU 및 TCU 프로그래밍 도구와 Car OBD-Bench-Boot LCV 프로토콜KESS3는 KESSv2와 K-TAG를 모두 대체하는 Alientech의 최신 ECU 튜닝 도구입니다. KESS3는 이전 모델인 KESSv2 및 K-TAG보다 더 많은 제어 기능을 제공하며, 새 하드웨어에 비용을 들이지 않고 업그레이드할 수 있습니다. 이 새로운 도구를 사용하면 동일한 장치에서 OBD 또는 Bench 튜닝 방식을...

The Creader Professional 719I is a smart, network-enabled diagnostic tool based on the Android platform. It features full-system code reading, code clearing, version information, data stream reading, and actuation tests—perfectly suited for the DIY passenger car market. In addition, it comes with 28 special functions, full OBD functionality, and lifetime free upgrades. It features full-system...

제품 소개: TOPDON Rlink X7 for Volkswagen은 OEM ODI-S V23.05 소프트웨어와 ODI-S Engineer v17.01을 지원합니다. RLink X7 6154의 OEM 진단 인터페이스는 폭스바겐, 아우디, 스코다, 세아트, 벤틀리, 람보르기니용 DoIP를 지원하며, OEM 소프트웨어 ODI-S와 호환됩니다. 폭스바겐용 RLink X7의 주요 특징:  1. VAS 5054 및 VAS 6154와 같은 OEM 도구의 완전 대체품 2. 소프트웨어 버전: ODI-S V23.05, 프로젝트...

닛산용 RLink X7의 지능형 차량 진단 인터페이스는 차세대 진단 기술을 대표합니다. 이 제품은 최신 고속 프로세서를 사용하며, 다중 채널 CAN-FD/DoIP 및 기존 진단 프로토콜을 완벽하게 지원하고, 더 많은 순정 진단 소프트웨어와 호환됩니다.RLink J2534 장치는 모든 J2534 프로토콜을 완벽하게 지원하여 OEM 재프로그래밍 및 진단 기능과의 호환성을 보장합니다. 고급 D-PDU, CAN-FD, DoIP 프로토콜을 통합하여 최신 차량에 적합합니다....

TOPDON TopScan Pro 중급 진단 도구 13가지 리셋 기능  소개: TopScan Pro는 휴대폰을 스캔 도구로 바꾸는 주머니 크기의 도구로, 기본 스캔을 넘어서는 사용자와 함께합니다. OBD2 포트에 연결하여 앱을 통해 진단을 시작하세요. TopScan Pro는 기본에 충실하며, 고장 코드 읽기 및 삭제가 가능하고, 미국, 아시아, 유럽 차량 70개 이상의 브랜드를 지원합니다.TopScan Pro는 신속한 자동차 수리를 위한 포괄적인...

Product Introduction: LAUNCH X431 PAD5 ELITE V2 is a new-generation PAD series product built on the Android 15.0 operating system. It features an octa-core high-performance processor, 8GB RAM and 128GB ROM for ample storage, and a high-capacity battery, delivering faster, more stable, and longer-lasting performance. It covers over 98% of vehicles on the market and...

대형 트럭은 현재 지원되지 않습니다.  

Xhorse VVDI 754J Smart Key PCB 315MHZ/433MHZ/868MHZ, please note it includes key pcb and key shell now. For Audi A6L Q5 A4L A8L New Version, support 315/ 433/ 868MHZ Switch frequency by software No welding required Support switch frequency using VVDI 2 / KEYTOOL / KEYTOOL MAX / MINI KEYTOOL / KEYTOOL PLUS  Note: Xhorse...

Condition: 100% Brand NewPN: XKHO01ENButton: 3+1 ButtonsKey Blade: NOTransponer Chip: No ChipBattery: NO (Battery model: CR2032)Style: for Honda Type Packing List 5pcs Xhorse XKHO01EN Wire Remote Key

This is a VVDI super chip, the latest Xhorse tool released in 24/04/2019.It's used with VVDI2 sw 6.5.0 for auto key programmingAlso can work with VVDI key tool and mini vvdi key toolIt's original from the Xhorse manufacturerFeatures:One for allPowerfulConvenientCompatibility:VVDI2  v6.5.0 or newer versionVVDI KEY TOOLVVDI MINI KEY TOOLFunction:Can be used as the chips below...

1. The Autel VCI Bluetooth Wireless Diagnostic Interface is Designed for: Repair shop technicians whose original Autel VCI communication adapter is lost, damaged or faulty and need replacement spare‑part Workshops using Autel MaxiSys series diagnostic tablets, requiring stable wireless vehicle‑tablet communication Mobile repair technicians who want wireless freedom to move around vehicle during diagnosis Service...

ISCAN PRO SERIES MARINE User Manual ISCAN PRO INDMAR MARINE COVERAGE  Product Introduction: ISCAN PRO INDMAR (MARINE) is a portable tablet which has super performance and industrial appearance design specialized for INDMAR. It is a new generation of intelligent marine diagnostic equipment tailored for customers. Based on RK3128 quad-core processor and equipped with a 7.0-inch...