Xhorse Multi Prog ECU TCU Programmer with GODIAG ECU GPT Boot Adapter and G-V ECU Cable for Reading and Writing VAG Gearbox

Xhorse Multi Prog ECU TCU Programmer with GODIAG ECU GPT Boot Adapter and G-V ECU Cable for Reading and Writing VAG Gearbox

Highlights:

1. Bundled package includes Xhorse Multi Prog ECU TCU Programmer, GODIAG ECU GPT Boot Adapter, and GODIAG G-V ECU Cable
2. The GODIAG ECU GPT Adapter supports reading and writing ECU data without disassembling the ECU, using OBD2 Bench or GPT Bench methods, or with ECU disassembly via Boot mode. It is equipped with a short-circuit protection BOOT resistor board connection cable to help protect the ECU. It can be used with J2534 devices and PCMFlash software
3. Enables ECU reading and writing via Bench and Boot modes

GODIAG G-V ECU Cable:

The GODIAG G-V ECU Cable is used to connect the Xhorse Multi Prog with GT107 or GT107+ GPT Bench Boot devices to read and write data for VAG gearbox and engine ECUs, as well as ECU cloning.

The Connection Diagram

1. To read DQ200 with Xhorse MULTI PROG & GT107+

2. To read DQ250 with Xhorse MULTI PROG & GT107+

3. To read DQ200 with Xhorse MULTI PROG & GT107

4. To read DQ250 with Xhorse MULTI PROG & GT107

5. To read ME17.8.8 with Xhorse MULTI PROG & GODIAG ECU GPT Boot AD Programming Adapter

6. To read MED17.5 with Xhorse MULTI PROG & GODIAG ECU GPT Boot AD Programming Adapter

Need Xhorse MULTI PROG

Supported ECU Models:

For Volkswagen, for Skoda, for Seat:
 
TEMIC DQ200-MQB
TEMIC DQ200-G2 
TEMIC DQ200Dxx
TEMIC DQ250-MQB
TEMIC DQ250Exx/Fxx
CONTINENTAL DQ500 
BOSCH DQ380
BOSCH DQ381
TEMIC DQ400E

Xhorse Multi-Prog Programmer Pro-level ECU TCU Programmer Highlights:

1. Fully replaces VVDI Prog. Multi-Prog supports factory usage mode for batch chip programming. In this mode, batch programming, offline programming, and file-based offline programming can be completed easily. The main difference between VVDI Prog and Multi-Prog is that Multi-Prog supports batch programming, while VVDI Prog does not
2. Includes free MQB48 license and BMW Bench ISN reading function. When bound with Xhorse VVDI2 or Key Tool Plus PAD account, MQB48 functions can also be used on VVDI2 or Key Tool Plus PAD
3. Supports ECU read, write, and cloning
4. Supports gearbox TCU read, write, and cloning
5. Supports EEPROM, ECU, and MCU reading and writing
6. Supports Bosch ECU ISN read and write with new Bosch ECU adapter
7. Supports checksum correction for some EDC16 and EDC17 ECUs, with more support to be added
8. Provides free BMW ISN reading function and continuous updates for NEC, MPC, Infineon and other chip types
9. Built-in free MQB48 license. By binding Multi-Prog and VVDI2 full version or Key Tool Plus to the same Xhorse APP account, MQB48 NEC35XX function can be used
10. Free software and firmware updates
11. Supports VAG MQB RH850 dashboard processor. Requires Xhorse XDMPR8GL MQB-RH850/V850 adapter (sold separately)
12. Compatible with Xhorse MQB solder-free adapters
13. Works with Xhorse Multi-Prog exclusive 4-in-1 adapters to extend chip read and write support

Other Features:

Supports reading and writing many chip types including MC9S08 series, MC68HC(9)12 series, MC9S12 series, V850 series, H8X series, R8C series, PCF79XX series, and most EEPROM chips
Supports chip data verification and blank check functions
Supports data file comparison function
Provides free PIN code calculation service via dump for various models
Supports reading and writing BMW N20 and N55 ECU with ISN display
Stable read and write for MC9S12XE series chips (5M48H, 1N35H, 2M53J, 3M25J, etc.)
Supports renewal of PCF79XX remotes, currently for BMW E/F series (PCF79XX adapter optional)
Includes large database of connection diagrams
Reserved ports for future updates
Supports Porsche 12V lithium battery and BYD lithium battery repair (MC9S12XET256)
Supports EDC17/MED17 data calculation and checksum correction
Supports third-party HEX editing scripts
Supports expert mode batch chip writing. VVDI Prog supports only single chip writing

GODIAG ECU GPT Boot Adapter Features:

The GODIAG ECU GPT Boot Adapter supports reading and writing ECU data without disassembling the ECU using OBD2 Bench or GPT Bench methods, as well as Boot mode with ECU disassembly. It is equipped with a short-circuit protection BOOT resistor board cable to help protect the ECU. It can be used with J2534 devices and PCMFlash software.

1. Dedicated ECU connection terminal
2. Supports manual ignition power control
3. Clearly labeled ECU interface cables for easy operation
4. Supports ECU conversion to OBD2 mode for reading and writing data
5. Supports RESET, BOOT, CNF1, GPT1, GPT2, 5V, 3.3V, VPP, and GND connections
6. Supports PCMFlash automatic ignition power control
7. Supports ECU Boot mode for reading and writing data
8. CAN bus switch with selectable 120Ω resistor
9. Supports GPT-based ECU reading and writing without ECU disassembly
10. Includes BOOT resistor board cable with anti-loss design

GODIAG ECU GPT Boot Adapter Functions:

Supports standard OBD2 diagnostic protocols
Supports ECU read and write operations with J2534 devices
For PCMFlash Module 71, Scanmatik 2 PRO is required to generate GPT1 and GPT2 signals
Other compatible devices include Scanmatik OpenPort 2.0, Mongoose JLR, MongoosePro JLR, Teradyne GNA600 (VCM 1), and Mazda VCM 2, supporting OBD2 or Boot mode ECU data reading and writing

Package Includes:

1pc x Multi-PROG
1pc x USB Cable
1pc x Power Adapter (15V 4A)
1pc x 220V Power Cord
1pc x VH13 Interface Adapter Board
1pc x VH20 Interface Adapter Board
1pc x VH23 Interface Adapter Board
1pc x MCU Adapter Multi-PROG Solder Cable
1pc x MCU DB15 Adapter Cable
1pc x ECU Adapter Multi-PROG Solder Cable
1pc x ECU DB15 Adapter Cable
1pc x Multi-PROG OBD Cable
1pc x USB WIFI Network Card
1pc x Product Manual
1pc x Certificate Of Conformity
43pcs x ECU Cable Plugs
1pc x GODIAG ECU GPT Boot AD Programming Adapter